Kết quả tìm kiếm cho: ''

Ứng dụng của bộ điều khiển WISE trong hệ thống báo cháy (Community Fire Alarm System)

Thiết bị trụ – họng chữa cháy là một phần không thể thiếu trong hệ thống an ninh Cộng đồng / Gia đình. Ngày nay, hầu hết các cộng đồng...

Đào tạo thường niên-Chương trình đào tạo 2019- ICP DAS Industrial IoT Cloud Solution with Edge Computing

IoT Cloud  là một ứng dụng phần mềm do ICP DAS phát triển để sử dụng trong việc giám sát và quản lý từ xa các bộ điều khiển WISE...

Giới thiệu P2P nâng cao của bộ điều khiển WISE

WISE-71xx, 72xx, 75xx and 790x controllers support up to 8 P2P Setting. This function enables WISE controllers to communicate with other remote controllers directly. The remote controllers can freely share...

Hoạt động I/O của bộ điều khiển WISE

Active I/O Introduction WISE-580x, WISE-52xx and WISE-224x equips the “Active I/O sending” function. There are two parts in this function: “I/O Data Table Configuration (I/O Data Table Setting)” and “Active...

Quy trình đăng ký và kết nối với dịch vụ Thông báo LINE (LINE Notify)

The procedure to register and connect to the LINE Notify service WISE-52xx/WISE-224x products series developed by ICP DAS support the connecting with LINE Notify service. After complete the connection setting,...

Chức năng MQTT của bộ điều khiển WISE

WISE-75xx, WISE-52xx and WISE-224x provide MQTT Client function. WISE-75xx can connect to one MQTT Broker, and WISE-52xx/WISE-224x can connect with two (Maximum) MQTT Brokers concurrently. In order to enable the...

Giao thức quản lý mạng của bộ điều khiển WISE (SNMP)

SNMP Introduction The WISE-52xx/WISE-224x provides SNMP (Simple Network Management Protocol) V1 and V2c to work with the SNMP Network Management software for monitoring the system data and I/O module data....

Cài đặt lệnh CGI (CGI Command Setting) của bộ điều khiển WISE

WISE controller offers CGI Command setting. This function allows sending pre-input CGI Command to pre-set remote network device under certain conditions. WISE-52xx/WISE-224x supports the CGI command receiving function. This function...

Chức năng gửi tin nhắn SMS của bộ điều khiển WISE

SMS Introduction WISE-5801(-MTCP) and WISE-523xM-3GWA/4GE/4GC is equipped with SMS alarm message notification function. It allows to include SMS alarm sending action into logic rules to send a pre-set SMS message...

Chức năng gửi tin nhắn email của bộ điều khiển WISE

WISE controller support Email messages sending function. This function allows sending pre-input Email message(s) to pre-set Email receiver(s) under certain conditions. The I/O channel information can be sent via Email...
TOP HOME