Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Card mở rộng 5 kênh DI (Wet)+ 6 kênh Relay ICP DAS XV116 CR

Card mở rộng 5 kênh DI (Wet)+ 6 kênh Relay ICP DAS XV116 CR

5-channel Isolated Digital Input and 6-channel Relay Output Module

Tính năng

Card mở rộng 5 kênh DI (Wet)+ 6 kênh Relay ICP DAS XV116 CR

  • 5 Digital Input channels and 6 Relay Output channels
  • Sink- and Source-type Digital Input
  • Digital Input Channels can be used as 32-bit Counters
  • Configurable Power-on Value Settings
  • 70 VDC Overvoltage Protection for Digital Input
Chia sẻ:
Model: XV116 CR
Views: 688

Card mở rộng 5 kênh DI (Wet)+ 6 kênh Relay ICP DAS XV116 CR

The XV116 provides 5 channels for digital input, as well as 6 Form A relay output channels. In addition, either sink- or source-type digital input can be selected via wire connections. All input channels can be used as 32-bit counters. The XV116 also provides options for configuring power-on digital output va l u e s . 4 kv ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise immunity capabilities in industrial environments.

Isolation
Intra-module Isolation 3750 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact For Each Terminal
±8 kV Air For Random Terminal
Digital Input/Counter
Channels 5
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +3.5 ~ +50 VDC
OFF Voltage Level +1 VDC Max.
Max. Counts 32-bit (0 ~ 4, 294, 967, 285)
Frequency 50 Hz
Min. Pulse Width 10 ms
Input Impedance 10 KΩ, 0.5 W
Overvoltage Protection 70 VDC
Relay Output
Channels Signal Relay: 2 (Channel 0,1)
Power Relay: 4 (Channel 2 ~ 5)
Type Signal Relay (Form A)
Power Relay (Form A)
Contact Rating Signal Relay: 2 A @ 30 VDC, 0.24 A @ 220 VDC, 0.25 A @ 250 VAC
Power Relay: 6 A @ 35 VDC, 6 A @ 240 VAC
Operate Time Signal Relay: 3 ms (typical)
Power Relay: 5 ms (typical)
Release Time Signal Relay: 4 ms (typical)
Power Relay: 1 ms (typical)
Electrical Endurance Signal Relay: 2 x 10^5 ops
Power Relay: 1 x 10^5 ops.
Mechanical Endurance Signal Relay: 10^8 ops.
Power Relay: 30 x 10^6 ops.
Power on Value Yes
COM Ports
Ports 1 x RS-232
Baud Rate 115200 bps
Data Format N, 8, 1
Protocol Modbus/RTU
Power
Consumption 1.2 W Max.
Powered from Terminal Block 5 VDC
Mechanical
Dimensions (mm) 59 mm x 82 mm x 13 mm (W x L x H)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
XV116     CR  5-ch Isolated DI (Wet) and 6-ch Relay Expansion Board (RoHS)
Data Sheet Quick Guide
TOP HOME