Trang chủ » PACs » Bộ lập trình nhúng PAC InduSoft CPU PXA270 OS CE 5.0 ICP DAS WP-8149-EN

Bộ lập trình nhúng PAC InduSoft CPU PXA270 OS CE 5.0 ICP DAS WP-8149-EN

Standard WinPAC-8000 controller with InduSoft

Chia sẻ:
Model: WP-8149-EN
Views: 334

Bộ lập trình nhúng PAC InduSoft CPU PXA270 OS CE 5.0 ICP DAS WP-8149-EN

WinPAC-8×49 Series (WP-8149/8449/8849) is the new generation WinCE based InduSoft PAC (Programmable Automation

Controller) of ICP DAS. It equips a PXA270 CPU (520MHz) running Windows CE.NET 5.0 Operating System, variant connectivity
(10/100 Base-TX dual Ethernet Ports, 2 or 4 RS-232/485 ports, 1 VGA, 1 USB port) and 1/4/8 slots for high performance Parallel-type
I/O modules (High Profile I-8K series) and Serial-type I/O modules (Hot-Swap High Profile I-87K I/O modules). Memories come with
128 MB SRAM, 512 KB dual battery backup SRAM, 96 MB FLASH & 16 GB microSD. For redundant supporting: dual Watchdog
Timers, redundant power inputs, dual battery backup SRAM, dual Ethernet Ports. WinPAC-8×47 Series will upgrade your system!

InduSoft Web Studio General Features
IWS applications run on microcomputers connected in real-time to machines or processors through WinPAC programmable controllers, remote I/O devices, and other data acquisition equipment. These applications consist of animated operator-interface screens, rollable I/O devices, an application tags database, and optional modules such as alarm monitors, trend charts, recipes, schedulers, and a security system.

InduSoft Integrated with WinPAC-8000

  • Easy steps to accomplish your system.
  • Communication drivers are provided by ICP DAS.
  • Monitor and control system from both sites (WinPAC) and control room (PC)

 

Communication Protocol

  • DCON Protocol for ICP DAS embedded controllers or I/O modules is provided.
  • Supports more than 200 Communication drivers such as Siemens, Omron and so forth.
  • InduSoft supports Modbus / OPC / DDE / TCP/IP / SNMP Client and Server.

Access Database Easily

  • Supports third-party SQL relational databases such as SQL Server, MS Access, Excel, Oracle …etc.
  • Database connectivety from any platform supported by IWS or CEView, through the unique Studio Database Gateway.
  • Supports Secondary Database in the modes “Redundancy” or “Store and Forward” to increase the reliability of the system and avoid loss of data

SNMP Protocol Supported

  • I/O Status of WinPAC can be gathered via Internet by polling or inform actively(trap) mode to remote SNMP manager station.
  • WinPAC controller can be treated as a SNMP gateway to transfer the information including I/O and user-defined data to SNMP manager station.
  • Integrating I/O and Network information in SNMP manager station.

 

Web Thin Clients

  • Use a regular WEB Browser (Internet Explorer) to host the application
  • Requests online and history data from the Server where InduSoft Web Studio is running, becoming a CLIENT for the data
  • Provide Multi-level security for applications, including the Internet and Intranet.

Useful Package Tool is Provided

ICP DAS has released a package tool for InduSoft. The package tool is integrated with several ActiveX objects and communication tools, including “GSM_ActiveX”, “SHM_ActiveX”, “COM_ActiveX” and “COM Port Communication Tool”…etc.

  • By using ActiveX objects provided by ICP DAS in InduSoft, user can easily develop multi-function application.
  • Reduce the number of used drivers.
  • To integrate with GSM/GPRS external modem easily.

  • Provide an easy way to exchange data between InduSoft and other Programs.

System Software
OS Windows CE 5.0
.Net Compact Framework 2.0
Embedded Service FTP Server, Web Server
Development Software
InduSoft Software InduSoft Web Studio v6.1 Service Pack 3
Non-InduSoft Options: Microsoft EVC++4.0 or VS.NET 2003/2005/2008 (VB.NET 2003/2005/2008, C#.NET 2003/2005/2008)
Web Service
Web HMI Support Web HMI function, PC running Internet Explorer can access to the WP-8×49 via Local Ethernet or Internet or dial Modem, monitoring and control.
Security Web HMI supports three levels user name and password protection
Power Supply
Input Range +10 ~ +30 VDC (unregulated)
Isolation 1 kV
Redundant Power Inputs Yes, with one power relay (1 A @ 24 VDC) for alarm
Protection WP-8149: 1.0 A, 5 V supply to CPU and backplane; 0.6 A, 5 V supply to I/O expansion slots, total 8 W
WP-8449: 1.1 A, 5 V supply to CPU and backplane; 4.9 A, 5 V supply to I/O expansion slots, total 30 W
WP-8849: 1.2 A, 5 V supply to CPU and backplane; 4.8 A, 5 V supply to I/O expansion slots, total 30 W
Consumption WP-8149: 7.3 W (0.3 A @ 24 V);
WP-8449: 9.1 W (0.38 A @ 24 V);
WP-8849: 9.6 W (0.4 A @ 24 V);
General Environment
Temperature Operating: -25 �XC ~ +75 �XC ( -13 �X F ~ +167 �X F) ,
Storage : -30 �XC ~ +85 �XC ( -40 �X F ~ +176 �X F)
Humidity 5 % ~ 95 % RH (non-condensed)
System
CPU CPU: PXA270, 32-bit and 520 MHz or compatible
Dual Watchdog Timer Watchdog: Dual Watchdog Timer
RTC (Real Time Clock) Gives hour, minute, sec, day of week, day of month, month & year, valid up from 1980 ~ 2079
SRAM 128 MB
Dual Battery Backup SRAM 512 KB (for 5 years data retain while power off)
FLASH 96 MB (64 MB for OS image, 31 MB for built-in Flash disk, 1 MB for registry)
Expansion Flash Memory microSD socket with 1 GB flash card
EEPROM 16 KB, Data retention: 40 years. 1,000,000 erase/write cycles
I/O Slots WP-8149: 1 slot (slot0); WP-8449: 4 slots (slot0 ~ slot3); WP-8849: 8 slots (slot0 ~ slot7);
Accept High Profile I-8K Parallel & High Profile I-87K Serial I/O boards
I/O Module Hot Swap Ability: for High Profile I-87K only
Rotary Switch Yes (0~9)
DIP Switch WP-8449 & WP-8849: Yes, 8 bits DIP Switch; WP-8149 : no DIP Switch
LED, NET ID 1 programmable LED indicator. NET ID: From 1 ~ 255, set by software
Unique Serial Number Yes,64-bit hardware unique serial number
Serial Ports
VGA Port 1 VGA port (800 x 600 resolution)
USB Port one USB 1.1 Host ports for USB mouse, keyboard or USB drive

COM0

Internal communication with the I-87K High Profile modules in slots

COM1

RS-232 (RxD, TxD, and GND); Non-isolation; Speed: 115200 bps max.

COM2

RS-485 (D2+, D2-; self-tuner ASIC inside); 2500 VDC isolation for 1 slot controller and 3000 VDC isolation for 4/8 slots controller; Speed: 115200 bps max.

COM3

RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232,
DATA+ and DATA- for RS-485); Non-isolation;
Speed: 115200 bps max. (WP-8149 has no COM3 & COM4.)

COM4 RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); Non-isolation; Speed: 115200 bps max. (WP-8149 has no COM3 & COM4.)

Dual Ethernet Ports

2 Ethernet Ports: LAN1 & LAN2, 10/100 Base-TX Ethernet Controller
(Auto-negotiating, Auto MDI/MDI-X, LED indicator)
Please use NS-205/NS-208 Industrial Ethernet Switch.

WP-8149-EN InduSoft based WinPAC-8000 with 1 I/O slot (English version of OS)
WP-8449-EN InduSoft based WinPAC-8000 with 4 I/O slots (English version of OS)
WP-8849-EN InduSoft based WinPAC-8000 with 8 I/O slots (English version of OS)
WP-8149-TC InduSoft based WinPAC-8000 with 1 I/O slot (Traditional Chinese version of OS)
WP-8449-TC InduSoft based WinPAC-8000 with 4 I/O slots (Traditional Chinese version of OS)
WP-8849-TC InduSoft based WinPAC-8000 with 8 I/O slots (Traditional Chinese version of OS)
WP-8149-SC InduSoft based WinPAC-8000 with 1 I/O slot (Simplified Chinese version of OS)
WP-8449-SC InduSoft based WinPAC-8000 with 4 I/O slots (Simplified Chinese version of OS)
WP-8849-SC InduSoft based WinPAC-8000 with 8 I/O slots (Simplified Chinese version of OS)
** The default runtime license (CEView Lite Plus – 300 tags and 1 driver) is installed. **
InduSoft-CE1500R Runtime License CEView Standard (1500 Tags and 3 Drivers)for WinPAC-8000
NS-205 CR Unmanaged 5-port Industrial Ethernet Switch (RoHS)
NS-208 CR Unmanaged 8-port Industrial 10/100 Base-T Ethernet Switch (RoHS)
RU-87Pn Remote Intelligent I/O Expansion Unit ( It used to expand I-87K series I/O modules over the RS-485 )
ADP-1080T-R 8″ Color Industrial Display Monitor with Sealed Touch Screen, RS-232 Interface.
Touch 500 Touch LCD Monitor (RS-232/RS-485)
DP-660 24 V/2.5 A , 5 V/0.5 A Dual Output Power Supply
DP-665 24 V/2.5 A , 5 V/0.5 A Dual Output Power Supply
DP-1200 CR 24 V/5 A Power Supply (RoHS)
Note1:
The I-7000 & I-87K series provides cost-effective protection and signals conversion for a wide range of valuable industrial control signals and control systems. Our product line includes RS-232 to RS-485 Converter, Digital I/O, Timer/Counter, Data Display, and application programs. I-7000 modules are good for a small amount of I/O channels, while I-87K I/O expansion units are good for medium amount of channels.

 

TOP HOME