Trang chủ » IIoT » Bộ lập trình IoT 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS WISE-7126 CR

Bộ lập trình IoT 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS WISE-7126 CR

Intelligent I/O Module with 6-ch AI, 2-ch AO, 2-ch DI and 2-ch DO

Tính năng

Bộ lập trình IoT 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS WISE-7126 CR

• Runs on browsers, no extra software tool is required.
• No more programming, Web pages provided for control logic editing.
• IF-THEN-ELSE logic rules execution ability.
• Built-in I/O (AI: 6-channels; AO: 2-channels; DI: 2-channels; DO: 2-channels).
• Support I/O channel monitoring/control, Timer.
• Support non-SSL Email sending and CGI Command sending operations.
• Modbus TCP Protocol for SCADA System Integration.
• IEEE 802.3af-compliant Power over Ethernet (PoE).

Chia sẻ:
Model: WISE-7126 CR
Views: 497

Bộ lập trình IoT 6 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS WISE-7126 CR

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7126 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7126 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This multi-function module WISE-7126 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 6-channel analog inputs, 2-channel analog outputs, 2-channel digital inputs and 2-channel digital outputs. Each analog input channel provides 240 Vrms high over voltage protection.

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote diagnosis and Testing Equipment
  • etc.
Software
Protocol • Modbus TCP
• CGI Command (Sending)
Function • Web Interface for Configuration
• IF-THEN-ELSE Logic operation (36 rule supported)
• I/O channel monitoring and control
• Timer operation (12 set supported)
• Internal Register operation (48 set supported)
• Recipe operation (12 set supported)
• Advanced P2P (8 set supported)
• non-SSL Email sending function
CPU Module
CPU 16-bit CPU (80 MHz)
Isolation
Intra-module Isolation 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random point
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
LED Indicators
Status 1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
1 x Ethernet 10/100M Speed
Analog Input
Channels 6 (Differential)
Type ±500 mV, ±1 V, ±5 V, ±10 V
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
(Jumper Selectable)
Resolution 16-bit
Accuracy ±0.1%
Sampling Rate 10 Sample/Sec. (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Overcurrent Protection 50 mA Max. at 110 VDC/VAC Max.
Individual Channel Configuration Yes
Channel-to-Channel Isolation ±400 VDC
Open Wire Detection Yes, for 4 ~ 20 mA only
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Analog Output
Channels 2
Type 0~5 VDC, ± 5 VDC, 0~10 VDC, ± 10 VDC
0~20 mA, 4~20 mA
(Jumper Selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Open Wire Detection Yes, for 4 ~ 20 mA only
Voltage Output Capability 20 mA @ 10 V
Current Load Resistance 500 Ω
Digital Input/Counter
Channels 2
Type Dry + Wet Contact
Sink/Source (NPN/PNP) Dry: Source
Wet: Sink/Source
ON Voltage Level Dry: Close to GND
Wet: +1 VDC Max.
OFF Voltage Level Dry: Open
Wet: + 3.5 VDC ~ + 30 VDC
Max. Counts 16-bit (65535)
Frequency 50 Hz
Min. Pulse Width 10 ms
Effective Distance 500M Max.
Overvoltage Protection +30 VDC
Digital Output
Channels 2
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +5 VDC ~ +50 VDC
Load Current 700 mA/Channel
Overvoltage Protection 60 VDC
Overload Protection 1.4 A
Short-circuit Protection Yes
Ethernet
Ports RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X
PoE Yes
Power
Reverse Polarity Protection Yes
Input Range 12 ~ 48 VDC
Consumption 3.9 W
Powered from PoE Yes, IEEE 802.3af, Class 1
Powered from Terminal Block Yes, 12 ~ 48 VDC
Mechanical
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Installation DIN-Rail Mounting/Wall Mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
WISE-7126     CR  Intelligent I/O Module with 6-ch AI, 2-ch AO, 2-ch DI, 2-ch DO and PoE (RoHS)
Datasheet Quick Guide
TOP HOME