Trang chủ » IIoT » Bộ lập trình IoT 10 kênh đầu cặp nhiệt (Thermocouple) + 6 kênh đầu ra số (DO) ICP DAS WISE-7118Z/S2 CR

Bộ lập trình IoT 10 kênh đầu cặp nhiệt (Thermocouple) + 6 kênh đầu ra số (DO) ICP DAS WISE-7118Z/S2 CR

Intelligent I/O Module with 10-ch Thermocouple Input and 6-ch DO

Chia sẻ:
Model: WISE-7118Z/S2 CR
Views: 507

Bộ lập trình IoT 10 kênh đầu cặp nhiệt (Thermocouple) + 6 kênh đầu ra số (DO) ICP DAS WISE-7118Z/S2 CR

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7118Z follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7118Z will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This module WISE-7160 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 6 power relay outputs and 6 isolated wet contact digital inputs. Each power relay supports contact rating as 5 A @ 250 VAC or 5 A @ 30 VDC and each digital input channel supports counter input.

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote diagnosis and Testing Equipment
  • etc.
Analog Input
Input Channels 10 (Differential)
Input Type ±15 mV, ±50 mV, ±100 mV, ±500 mV,±1 V, ±2.5 V
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Requires Optional External 125 Ω Resistor)
Thermocouple (J, K, T, E, R, S, B, N,C, L, M, LDIN43710)
Resolution 16-bit
Sampling Rate 10 Samples/Sec. (Total)
Accuracy ±0.1% or better
Zero Drift ±0.5 uV/°C
Span Drift ±25 ppm/°C
Overvoltage Protection 240 Vrms
Input Impedance >300 kΩ
Common Mode Rejection 150 dB Min.
Normal Mode Rejection 100 dB
Individual Channel Configuration Yes
Temperature outputs consistency Yes
Stable temperature output in the field Yes
Open Wire Detection Yes
Digital Output
Output Channels 6
Output Type Isolated Open Collector (Sink)
Max. Load Current 700 mA/Channel
Load Voltage 5 VDC ~ 50 VDC
Overvoltage Protection 60 VDC
Overload Protection 1.4 A
Short-circuit Protection Yes
System
CPU 16-bit CPU
SRAM 512 KB
Flash Memory 512 KB
EEPROM 16 KB
Watchdog Yes
Communication
PoE Ethernet Port 10/100 Base-TX and automatic MDI/MDI-X
2 Way Isolation
I/O 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random point
EFT (IEC 61000-4-4) ±4 kV for Power Line
LED Indicators
PoE PoE On
L1 System Running
L2 Ethernet Link/Act
L3 Ethernet 10/100M Speed
Power Requirements
Reserve Polarity Protection Yes
Powered from terminal block Yes, 12 ~ 48 VDC
Powered from PoE Yes, IEEE 802.3af, Class1
Consumption 3.0 W
Mechanical
Dimensions (W x H x D) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall mounting
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
Functions
Rule Configuration Website Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules 3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions
48 Internal Registers Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers Delay / Timing functions.
12 Emails Send Email messages to pre-set Email receivers.
12 CGI Commands Send pre-set CGI commands.
12 Recipes Set up THEN/ELSE action groups.
8 P2P remote modules Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
AI Channel = 、> 、< 、 ≥ 、 ≤ (value)
Internal Register
DO Counter = 、> 、< 、 ≥ 、 ≤ (value)、Change
Timer Timeout、Not Timeout
P2P DI、AI、DI counter、DO counter、IR
Rule Status Enable、Disable
THEN / ELSE Actions
DO Channel ON、OFF、Pulse Output
Internal Register Change the value
DO Counter Reset
Timer Start、Stop
Email Send
CGI Commands
Recipe Execute
P2P DO(On/Off)、AO、IR
Rule Status Enable、Disable
WISE-7118Z/S2     CR Intelligent I/O Module with 10-ch Thermocouple Input and 6-ch DO and PoE (RoHS)
Includes DN-1822 Daughter Board and 1.8 m Cable
  • GPSU06U-6 : 24 V/0.25 A, 6 W Power Supply
  • MDR-20-24 : 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting
  • NS-205 CR : Unmanaged 5-Port Industrial Ethernet Switch
  • NS-205PSE CR : Unmanaged 5-Port Industrial PoE Ethernet Switch (RoHS)
  • CD-2518D : 25F-25M 1.8 m Cable with DIN-Rail Mount of DB-1820
  • CD-25015 : 25F-25M 15 cm Cable with DIN-Rail Mount of DB-1820
WISE-7118Z Connects
DB-1820 Directly
WISE-7118Z Connect
DB-1820 with CD-2518D Kit
WISE-7118Z Connects
DN-1822 Directly
TOP HOME