Trang chủ » IIoT » Bộ lập trình IoT 3 kênh đầu vào tương tự + 6 kênh đầu vào số + 3 kênh đầu ra Relay ICP DAS WISE-7102 CR

Bộ lập trình IoT 3 kênh đầu vào tương tự + 6 kênh đầu vào số + 3 kênh đầu ra Relay ICP DAS WISE-7102 CR

Intelligent I/O Module with 3-ch AI, 6-ch DI and 3-ch Power Relay

Chia sẻ:
Model: WISE-7102 CR
Views: 352

Bộ lập trình IoT 3 kênh đầu vào tương tự + 6 kênh đầu vào số + 3 kênh đầu ra Relay ICP DAS WISE-7102 CR

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7102 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7102 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This multi-function module WISE-7102 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 3-channels analog inputs, 6-channels digital inputs and 3-channels Power Relay outputs. Each analog input channel provides 240 Vrms high over voltage protection.

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote diagnosis and Testing Equipment
  • etc.
Protocol • Modbus TCP
• CGI Command (Sending)
Function • Web Interface for Configuration
• IF-THEN-ELSE Logic operation (36 rule supported)
• I/O channel monitoring and control
• Timer operation (12 set supported)
• Internal Register operation (48 set supported)
• Recipe operation (12 set supported)
• Advanced P2P (8 set supported)
• non-SSL Email sending function
CPU Module
CPU 16-bit CPU (80 MHz)
Intra-module Isolation 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random point
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
LED Indicators
Status 1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
1 x Ethernet 10/100M Speed
Analog Input
Channels 3 (Differential)
Type ±150mv, ±500mv, ±1 V, ±5 V, ±10 V
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
(Jumper Selectable)
Resolution 16-bit
Accuracy ±0.1%
Sampling Rate 10 Sample/Sec. (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Overvoltage Protection 240 Vrms
Overcurrent Protection Yes, 50 mA max. at 110 VDC/VAC max.
Individual Channel Configuration Yes
Open Wire Detection Yes, for 4 ~ 20 mA only
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Digital Input/Counter
Channels 6
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 VDC ~ +50 VDC
OFF Voltage Level +4 VDC Max.
Max. Counts 16-bit (65535)
Frequency 50 Hz
Min. Pulse Width 10 ms
Input Impedance 10 KΩ, 0.5W
Overvoltage Protection +70 VDC
Relay Output
Channels 3
Type Power Relay, Form A (SPST N.O.)
Contact Rating Operating Voltage Range: 250 VAC/30 VDC
Max Load Current: 5.0A/channel at 25°C
Intra-module Isolation, Field to Logic: 3750 VDC
Operate Time 6 ms (Typical)
Release Time 3 ms (Typical)
Electrical Endurance VDE:
5 A @ 250 VAC 30,000 ops. (10 ops./minute) at 75°C
5 A @ 30 VDC 70,000 ops. (10 ops./minute) at 75°C
5 A @ 250 VAC/30 VDC 6,000 ops.
3 A @ 250 VAC/30 VDC 100,000 ops.
Mechanical Endurance 20,000,000 ops. at no load (300 ops./minute)
Ports RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X
PoE Yes
Reverse Polarity Protection Yes
Input Range 12 ~ 48 VDC
Consumption 3.4 W
Powered from PoE Yes, IEEE 802.3af, Class 1
Powered from Terminal Block Yes, 12 ~ 48 VDC
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Installation DIN-Rail Mounting/Wall Mounting
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
WISE-7102     CR  Intelligent I/O Module with 3-ch AI, 6-ch DI, 3-ch Power Relay and PoE (RoHS)