Trang chủ » Wireless Communication » Module Wi-Fi Modbus TCP 5 kênh AI + 2 kênh AO + 2 kênh DI + 3 kênh DO ICP DAS WF-2026 CR

Module Wi-Fi Modbus TCP 5 kênh AI + 2 kênh AO + 2 kênh DI + 3 kênh DO ICP DAS WF-2026 CR

Wi-Fi I/O Module with 5-ch AI, 2-ch AO, 2-ch DI and 3-ch DO

Chia sẻ:
Model: WF-2026 CR
Views: 681

Module Wi-Fi Modbus TCP 5 kênh AI + 2 kênh AO + 2 kênh DI + 3 kênh DO ICP DAS WF-2026 CR

The WF-2026 is a multifunction module with Wi-Fi interface that includes 5 analog input channels, 2 analog output channels, 2 digital input channels and 3 digital output channels. It provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA or 0 ~ +20 mA) and output range on all analog output (12-bit at +/-5 V, +/-10 V, 0 ~ +20 mA or +4 ~ +20 mA). Each analog input and output channel can be configured for an individual range and provides a high overvoltage protection of 240 Vrms. Analog Input and output can be jumper selectable as either voltage or current.

With the popularity of 802.11 network infrastructure, the WF-2026 makes an easy way to incorporate wireless connectivity into monitoring and control systems. The WF-2026 also supports Modbus/TCP and UDP protocols and the network encryption configuration, which makes perfect integration to SCADA software and offer easy and safe access for users from anytime and anywhere.

Isolation
Intra-module Isolation Power: 3000 VDC
DO: 3750 VDC
DI: 3750 VDC
Wi-Fi
Transmission Distance (LoS) 50 meters (LOS)
Standard IEEE 802.11 b/g*
IEEE 802.11 b/g/n**
RX Sensitivity -83 dBm @ 11 Mbps*
-93 dBm @ 11 Mbps**
Output Power 8 dBm @ 11 Mbps*
14 dBm @ 11 Mbps**
Mode Infrastructure & Ad-hoc*
Infrastructure & Limit-AP**
Encryption WEP, WPA and WPA2
Antenna 5 dBi (Omni-Directional)
Analog Input
Channels 5 (Differential)
Type Voltage
Current
Range Voltage: ±150 mVDC, ±500 mVDC, ±1 VDC, ±5 VDC, ±10 VDC
Current: 0 ~ +20 mA, +4 ~ +20 mA, ±20 mA (Jumper Selectable)
Resolution 16-bit
Accuracy ±0.1% of FSR
Sampling Rate 10 Hz (Total)
Input Impedance Voltage: 2 MΩ
Current: 140 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Overvoltage Protection 240 Vrms
Overcurrent Protection Yes, 50 mA @ 110 VDC
Individual Channel Configuration Yes
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Analog Output
Channels 2
Type Voltage: +0 ~ +5 VDC, +0 ~ +10 VDC, ±5 VDC, ±10 VDC
Current: +0 ~ +20 mA, +4 ~ +20 mA (Jumper Selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Voltage Output Capability 10 VDC @ 20 mA
Power-on Value Yes, Programmable
Safe Value Yes, Programmable
Digital Input/Counter
Channels 2
Type Dry Contact
Sink/Source (NPN/PNP) Source
ON Voltage Level Close to GND
OFF Voltage Level Open
Digital Output
Channels 3
Sink/Source (NPN/PNP) Sink (NPN)
Load Voltage +3.5 ~ +50 V
Load Current 700 mA per channel
Overvoltage Protection 60 VDC
Short-circuit Protection Yes
Power on Value Yes, Programmable
Safe Value Yes, Programmable
Power
Input Range +10 VDC ~ +30 VDC
Consumption 2.2 W
Mechanical
Dimensions (mm) 33 x 127 x 107 (W x L x H)
(Without antenna)
Installation DIN-Rail Mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
WF-2026     CR  Wi-Fi I/O Module with 5-ch AI, 2-ch AO, 2-ch DI and 3-ch DO (Asia Only) (RoHS)
Includes ANT-124-05 Antenna and CA-0910 Cable
TOP HOME