Trang chủ » Truyền thông công nghiệp » Bộ điều khiển lập trình uPAC-7186 CAN ICP DAS uPAC-7186EXD-CAN-G CR

Bộ điều khiển lập trình uPAC-7186 CAN ICP DAS uPAC-7186EXD-CAN-G CR

uPAC-7186 CAN Programmable Controller

Tính năng

Bộ điều khiển lập trình uPAC-7186 CAN ICP DAS uPAC-7186EXD-CAN-G CR

  • 1000 VDC voltage protection on CAN side
  • Compatible with CAN specification 2.0 parts A and B
  • Programmable transfer rate up to 1 Mbps
  • Jumper select 120Ω terminal resistor for CAN channel
  • Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP
  • 10/100BASE-T Ethernet Controller
  • Upgradable OS image
  • Remote Configuration
  • 64-bit hardware unique serial number inside
  • COM driver support interrupt & 1KB QUEUE Input & Output buffer
  • COM port: COM1, COM2
  • Built-in RTC, NVRAM, EEPROM
  • Built-in self-tuner ASIC controller on RS-485 port
  • 7-segment LED display
  • Built-in ICP DAS’s MiniOS7
  • Program download port: COM1 or Ethernet Port (Available Soon)
Chia sẻ:
Model: uPAC-7186EXD-CAN-G CR
Views: 500

Bộ điều khiển lập trình uPAC-7186 CAN ICP DAS uPAC-7186EXD-CAN-G CR

“Embedded Internet” and “Embedded Ethernet” are hot topics today. Nowadays the Ethernet protocol becomes the de-facto standard for local area network. Via Internet, connectivity is occurring everywhere, from home appliances to vending machines to testing equipment to UPS…etc. Using Ethernet for network in industrial area is appealing because the required cabling is already installed. The uPAC-7186EXD-CAN PACs (programmable Automation controller) are powered by 80186-80 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port, RS-485 port and Ethernet interface. Uses can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the uPAC-7186EXD-CAN series PACs have different I/O types for users to match their requirement. For uPAC-7186EXD-CAN , there is no I/O channel. It is useful for transfer the command from differential communication interface. Therefore, the uPAC-7186EXD-CAN series PACs are economic and convenient solution for diversification CAN application.

  • CAN bus communication application
  • Industry automation
  • Auto detecting CANopen slave devices
  • IO monitor
  • High speed data acquisition system
  • Process monitor and control
  • Factory automation
  • Laboratory automation
  • Communication switching

The software library provides TCP/IP protocols & web server. Support the following protocols.

  • TCP, Transmission Control Protocol:
    Transport layer with connections, flow control and error correction
  • UDP, User Datagram Protocol:
    Simple connectionless transport layer
  • IP, Internet Protocol:
    The network layer
  • ICMP, Internet Control Message Protocol:
    Part of IP for practical purposes
  • ARP, Address Resolution Protocol:
    Retrieves a host’s network controller’s hardware address, given the host’s Internet address
  • Reverse Address Resolution Protocol:
    Retrieves a host’s Internet address, given the host’s network controller’s
CPU Module
CPU 80186, 80 MHz or compatible
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles
Flash 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles
NVRAM 31 bytes (battery backup, data valid for up to 10 years)
SRAM 512 KB
Real Time Clock Yes
LED Indicators
Status 3 x Programmable
COM Ports
Ports 1 x RS-232 (5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND))
1 x RS-485 (Self-turner inside ; 2-pin screwed terminal block (DATA+, DATA-))
Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Ethernet
Ports 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
CAN
Controller NXP SJA1000T with 16 MHz clock
Transceiver NXP 82C250/NXP TJA1042
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Power
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Mechanical
Casing Plastic
Dimensions (mm) 72 x 122 x 33 (W x L x H)
Installation DIN-Rail
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
uPAC-7186EXD-CAN-G     CR uPAC-7186 CAN Programmable Controller with Series Port, Ethernet port, 7-segment Display and Programable LEDs (RoHS)
Data Sheet
TOP HOME