Bộ lập trình nhúng 1 cổng RS-232/RS-485 ICP DAS uPAC-7186EGD CR
The uPAC-7186EG Series (uPAC-7186EG, uPAC-7186EGD) is a palm-size PAC and includes ISaGRAF SoftLogic. It has one 10/100 Base-TX Ethernet port, one RS-232 port, and one RS-485 port.
The user can choose an I/O expansion board, X-Board, to expand the I/Os or memories of uPAC. uPAC-7186EG support Modbus Serial protocol, Modbus TCP/IP protocol, Modbus Master protocol, Remote I/O, Fbus, Ebus, SMS: Short Message Service, modem link, MMICON/LCD, ZigBee wireless communication, GPS application, FRnet, CAN remote I/O connection and user-defined protocol.
| Software |
| OS |
MiniOS7 |
| Protocol |
• NET ID
• Modbus TCP/IP Slave
• Modbus RTU/ASCII Master
• Modbus RTU Slave
• DCON Protocol
• User-defined Protocol
• I/O Type: DCON, Modbus RTU, and Modbus TCP/IP remote I/O
• Send Email
• Fbus
• Ebus
• SMS
• CAN/CANopen |
| Development |
Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3) |
| CPU Module |
| CPU |
80186, 80 MHz |
| 64-bit Hardware Serial Number |
Yes |
| EEPROM |
16 KB |
| Flash |
512 KB |
| NVRAM |
31 Bytes |
| SRAM |
640 KB |
| Real Time Clock |
Provide seconds, minutes, hours, dates, day of week, month, year |
| Watchdog Timer |
Yes |
| Display |
| Type |
5 x Digit 7 Segment LED Display |
| LED Indicators |
| Status |
1 x System
1 x PoE |
| I/O Expansion |
| I/O Type |
X-board |
| COM Ports |
| Ports |
1 x RS-232, Non-isolated
1 x RS-485, Non-isolated |
| Baud Rate |
115200 bps Max. |
| Ethernet |
| Ports |
1 x RJ-45, 10/100 Base-TX |
| Power |
| Input Range |
+10 ~ 30 VDC |
| Consumption |
3.0 W |
| Mechanical |
| Dimensions (mm) |
72 x 123 x 35 (W x H x D) |
| Installation |
DIN-Rail Mounting |
| Environmental |
| Operating Temperature |
-25 ~ +75°C |
| Storage Temperature |
-40 ~ +80 °C |
| Humidity |
5 ~ 90 % RH, Non-condensing |
Specification Memo
Note: The COM3 ~ COM8 are located in the optional X-board series if it is installed inside the uPAC-7186EG(D)
