Trang chủ » PACs » Bộ lập trình nhúng 1 cổng RS-232/RS-485 ICP DAS uPAC-7186EG CR

Bộ lập trình nhúng 1 cổng RS-232/RS-485 ICP DAS uPAC-7186EG CR

ISaGRAF Based Palm-Sized Serial/Ethernet PAC with 80186-80 CPU, MiniOS7

Chia sẻ:
Model: uPAC-7186EG CR
Views: 443

Bộ lập trình nhúng 1 cổng RS-232/RS-485 ICP DAS uPAC-7186EG CR

The uPAC-7186EG Series (uPAC-7186EG, uPAC-7186EGD) is a palm-size PAC and includes ISaGRAF SoftLogic. It has one 10/100 Base-TX Ethernet port, one RS-232 port, and one RS-485 port.

The user can choose an I/O expansion board, X-Board, to expand the I/Os or memories of uPAC. uPAC-7186EG support Modbus Serial protocol, Modbus TCP/IP protocol, Modbus Master protocol, Remote I/O, Fbus, Ebus, SMS: Short Message Service, modem link, MMICON/LCD, ZigBee wireless communication, GPS application, FRnet, CAN remote I/O connection and user-defined protocol.

Software
OS MiniOS7
Protocol • NET ID
• Modbus TCP/IP Slave
• Modbus RTU/ASCII Master
• Modbus RTU Slave
• DCON Protocol
• User-defined Protocol
• I/O Type: DCON, Modbus RTU, and Modbus TCP/IP remote I/O
• Send Email
• Fbus
• Ebus
• SMS
• CAN/CANopen
Development Embedded ISaGRAF Ver.3 SoftLogic (IEC 61131-3)
CPU Module
CPU 80186, 80 MHz
64-bit Hardware Serial Number Yes
EEPROM 16 KB
Flash 512 KB
NVRAM 31 Bytes
SRAM 640 KB
Real Time Clock Provide seconds, minutes, hours, dates, day of week, month, year
Watchdog Timer Yes
LED Indicators
Status 1 x System
1 x PoE
I/O Expansion
I/O Type X-board
COM Ports
Ports 1 x RS-232, Non-isolated
1 x RS-485, Non-isolated
Baud Rate 115200 bps Max.
Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
Power
Input Range +10 ~ 30 VDC
Consumption 2.0 W
Mechanical
Dimensions (mm) 72 x 123 x 35 (W x H x D)
Installation DIN-Rail Mounting
Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90 % RH, Non-condensing

Specification Memo

Note: The COM3 ~ COM8 are located in the optional X-board series if it is installed inside the uPAC-7186EG(D).
uPAC-7186EG     CR ISaGRAF Based Palm-Sized Serial/Ethernet PAC with 80186-80 CPU, MiniOS7 (RoHS)
ISaGRAF Development Software
ISaGRAF-256 ISaGRAF Workbench Software Ver.3 (256 I/O Tags) with one USB Dongle
ISaGRAF-32 ISaGRAF Workbench Software Ver.3 (32 I/O Tags)
Note: No upgrade service from ISaGRAF-32 to ISaGRAF-256 is available.
(ISaGRAF-32 can be used to control more than 32 I/O tags. Please refer to Ch. 3.4 of the ISaGRAF User Manual.)
TOP HOME