Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module I/O OPC UA 8 kênh DI+8 kênh DO+2 cổng Ethernet Switch ICP DAS U-7555M CR

Module I/O OPC UA 8 kênh DI+8 kênh DO+2 cổng Ethernet Switch ICP DAS U-7555M CR

OPC UA I/O Module with 8-ch DI, 8-ch DO and 2-port Ethernet Switch

Features

Module I/O OPC UA 8 kênh DI+8 kênh DO+2 cổng Ethernet Switch ICP DAS U-7555M CR

  • Built-in Web Server to Provide the Web User Interface
  • Built-in OPC UA Server and MQTT Client Protocol
  • Support to Execute OPC UA and MQTT Communication Simultaneously
  • Built-in I/O Channels (8 x DI and 8 x DO)
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • IEEE 802.3af-compliant Power over Ethernet (PoE)
Chia sẻ:
Model: U-7555M CR
Views: 624

Module I/O OPC UA 8 kênh DI+8 kênh DO+2 cổng Ethernet Switch ICP DAS U-7555M CR

U-7555M is an OPC UA I/O module that provides 8 digital input channels and 8 digital output channels. It has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easy and can reduce the total cable and switch cost.

U-7555M follows IEEE 802.3af compliant Power over Ethernet (PoE) specifi cation. It allows receiving power from PoE enabled network by Ethernet pairs. This feature provides greater fl exibility and effi ciency to simplify system design, save space, and reduce wirings and power sockets. It provides a Web UI to confi gure/control/monitor the modules, connections, and I/O status via a web browser. It is easy, fast, and no extra APP needed.

In industrial communication, UA I/O provides OPC UA Server and MQTT Client protocols (can execute both communications at the same time.). Users can choose the networking mode according to their cases. And to transmit the values of the built-in I/O channels to the Cloud IT system or field control system for reading and writing. Support Scaling to convert the analog signal into a more readable value.

Software
Protocol 1. OPC UA Server
• OPC Unified Architecture: 1.02
• Core Server Facet
• Data Access Server Facet
• Method Server Facet
• UA-TCP UA-SC UA Binary
• User Authentication: Anonymous, Username/Password, X.509 Certificate
• Security Policy: None, Basic128Rsa15 (Sign, Sign & Encrypt), Basic256 (Sign, Sign & Encrypt)
• Recommend to keep the max. number of sessions within 3 connections.
• Can Execute with MQTT Communication Simultaneously2. MQTT Client
• Connect to the MQTT Broker to read or control the I/O channel value by the publish/subscribe messaging mechanism. (MQTT Ver. 3.1.1; TLS Ver. 1.2)
• Can Execute with OPC UA Communication Simultaneously
Function 1. Web Interface for Configuration
• The system operation can be performed through the browser without installing software tools.
• Use AES 256 encryption algorithm to encrypt web page setting data for general communication.2. Security
• Based on security, only the needed service ports are open up, and the rest are not open.
• Forbidden to use ping: turn off this function so that others cannot scan the device, to reduce the network attacks.
CPU Module
CPU 32-bit CPU (400 MHz)
Isolation
Intra-module Isolation 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random point
Surge (IEC 61000-4-5) ±2 kV for Power Line
LED Indicators
Status 1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
16 x I/O Channel Status
Digital Input/Counter
Channels 8
Type Dry + Wet Contact
Sink/Source (NPN/PNP) Dry: Source
Wet: Sink/Source
Wet Contact, ON Voltage Level +10 VDC ~ +50 VDC
Wet Contact, OFF Voltage Level +4 VDC Max.
Dry Contact, ON Voltage Level Close to GND
Dry Contact, OFF Voltage Level Open
Dry Contact, Effective Distance 500 M Max.
Max. Counts 16-bit (65535)
Frequency 50 Hz
Min. Pulse Width 10 ms
Input Impedance 10 kΩ
Overvoltage Protection +70 VDC
Digital Output
Channels 8
Type Isolated Open Collector
Sink/Source (NPN/PNP) Source
Load Voltage +10 VDC ~ +40 VDC
Max. Load Current 650 mA/Channel at 25°C
Overvoltage Protection 47 VDC
Short-Circuit Protection Yes
Ethernet
Ports RJ-45 x 2, 10/100 Base-TX, Swtich Ports (LED indicators)
PoE Yes
Power
Reverse Polarity Protection Yes
Input Range 12 ~ 48 VDC
Consumption 3.7 W
Powered from PoE Yes, IEEE 802.3af, Class 1
Powered from Terminal Block Yes, 12 ~ 48 VDC
Mechanical
Dimensions (mm) 97 x 120 x 42 (W x L x H)
Installation Wall Mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
U-7555M     CR OPC UA I/O Module with 8-ch DI, 8-ch DO and 2-port Ethernet Switch. (RoHS)
Data Sheet icon_manual icon_tool
TOP HOME