Trang chủ » Remote I/O Module and Unit » Module I/O OPC UA 4 kênh DI+4 kênh AI+4 kênh AO+2 cổng Ethernet Switch ICP DAS U-7504M CR

Module I/O OPC UA 4 kênh DI+4 kênh AI+4 kênh AO+2 cổng Ethernet Switch ICP DAS U-7504M CR

OPC UA I/O Module with 4-ch DI, 4-ch AI, 4-ch AO, and 2-port Ethernet Switch
Chia sẻ:
Model: U-7504M CR
Views: 514

Module I/O OPC UA 4 kênh DI+4 kênh AI+4 kênh AO+2 cổng Ethernet Switch ICP DAS U-7504M CR

U-7504M is a UA I/O module that provides 4 digital input, 4 analog input, and 4 analog output channels. It has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easy and can reduce the total cable and switch cost.

U-7504M follows IEEE 802.3af compliant Power over Ethernet (PoE) specifi cation. It allows receiving power from PoE enabled network by Ethernet pairs. This feature provides greater fl exibility and effi ciency to simplify system design, save space, and reduce wirings and power sockets. It provides a Web UI to confi gure/control/monitor the modules, connections, and I/O status via a web browser. It is easy, fast, and no extra APP needed.

In industrial communication, UA I/O provides OPC UA Server and MQTT Client protocols (can execute both communications at the same time.). Users can choose the networking mode according to their cases. And to transmit the values of the built-in I/O channels to the Cloud IT system or field control system for reading and writing. Support Scaling to convert the analog signal into a more readable value.

Software
Protocol 1. OPC UA Server
• OPC Unified Architecture: 1.02
• Core Server Facet
• Data Access Server Facet
• Method Server Facet
• UA-TCP UA-SC UA Binary
• User Authentication: Anonymous, Username/Password, X.509 Certificate
• Security Policy: None, Basic128Rsa15 (Sign, Sign & Encrypt), Basic256 (Sign, Sign & Encrypt)
• Recommend to keep the max. number of sessions within 3 connections.
• Can Execute with MQTT Communication Simultaneously2. MQTT Client
• Connect to the MQTT Broker to read or control the I/O channel value by the publish/subscribe messaging mechanism. (MQTT Ver. 3.1.1; TLS Ver. 1.2)
• Can Execute with OPC UA Communication Simultaneously
Function 1. Web Interface for Configuration
• The system operation can be performed through the browser without installing software tools.
• Use AES 256 encryption algorithm to encrypt web page setting data for general communication.2. Scaling
• Convert the analog signal to a more readable value.
• Function is only available for modules with AI/O.3. Security
• Based on security, only the needed service ports are open up, and the rest are not open.
• Forbidden to use ping: turn off this function so that others cannot scan the device, to reduce the network attacks.
CPU Module
CPU 32-bit CPU (400 MHz)
Isolation
Intra-module Isolation 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random point
Surge (IEC 61000-4-5) ±2 kV for Power Line
LED Indicators
Status 1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
12 x I/O Channel Status
Analog Input
Channels 4 (Differential)
Type ±500 mV, ±1 V, ±5 V, ±10 V
+0 mA ~ +20 mA, ±20 mA, 4 ~ 20 mA
(Jumper Selectable)
Resolution 16-bit
Accuracy ±0.1%
Sampling Rate 10 Samples/Second (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Overcurrent Protection Yes, 50 mA Max. at 110 VDC/VAC Max
Individual Channel Configuration Yes
Channel-to-Channel Isolation Yes, 400 VDC
Open Wire Detection Yes, for 4 ~ 20 mA only
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Analog Output
Channels 4
Type +0 VDC ~ +5 VDC, ±5 VDC, +0 VDC ~ +10 VDC,±10 VDC
+0 mA ~ +20 mA, +4 mA ~ +20 mA
(Jumper Selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Open Wire Detection Yes, for 4 ~ 20 mA only
Voltage Output Capability 20 mA @ 10 V
Current Load Resistance 400 Ω
Digital Input/Counter
Channels 4
Type Dry + Wet Contact
Wet Contact, ON Voltage Level +1 VDC Max.
Wet Contact, OFF Voltage Level +3.5 VDC ~ +30 VDC
Dry Contact, ON Voltage Level Close to GND
Dry Contact, OFF Voltage Level Open
Dry Contact, Effective Distance 500 M Max.
Max. Counts 16-bit (65535)
Frequency 50 Hz
Min. Pulse Width 10 ms
Overvoltage Protection +30 VDC
Ethernet
Ports RJ-45 x 2, 10/100 Base-TX, Swtich Ports (LED indicators)
PoE Yes
Power
Reverse Polarity Protection Yes
Input Range 12 ~ 48 VDC
Consumption 5.1 W
Powered from PoE Yes, IEEE 802.3af, Class 1
Powered from Terminal Block Yes, 12 ~ 48 VDC
Mechanical
Dimensions (mm) 97 x 120 x 42 (W x L x H)
Installation Wall Mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
U-7504M     CR OPC UA I/O Module with 4-ch DI, 4-ch AI, 4-ch AO, and 2-port Ethernet Switch (RoHS)
TOP HOME