Trang chủ » Truyền thông công nghiệp » Bộ chuyển đổi 2 cổng Master share 1 cổng Slave 2 cổng cách ly RS-232+1 cổng cách ly RS-485 ICP DAS tSH-734i CR

Bộ chuyển đổi 2 cổng Master share 1 cổng Slave 2 cổng cách ly RS-232+1 cổng cách ly RS-485 ICP DAS tSH-734i CR

Tiny (2x Isolated RS-232 and 1x Isolated RS-485) Serial Port Sharer with PoE

Tính năng

Bộ chuyển đổi 2 cổng Master share 1 cổng Slave 2 cổng cách ly RS-232+1 cổng cách ly RS-485 ICP DAS tSH-734i CR

  • Supports Baud Rate conversion application
  • Supports Modbus RTU/ASCII protocol conversion
  • Supports two masters sharing one slave port for tSH-73x Series only
  • Raw data mode for most query-response protocols
  • Built-in web server for easy configuration (HTTP)
  • Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
  • Allows automatic RS-485 direction control
  • Tiny form-factor and low power consumption
  • Read-cache ensures faster response
Chia sẻ:
Model: tSH-734i CR
Views: 1868

Bộ chuyển đổi 2 cổng Master share 1 cổng Slave 2 cổng cách ly RS-232+1 cổng cách ly RS-485 ICP DAS tSH-734i CR

The tSH-700 module is a serial port sharer/converter that provides a number of functions, including “Baud Rate Conversion”, “Modbus RTU/ASCII Conversion”, “Two Masters Share One Slave” and “Read-Cache Function”.

The built-in web server provides easy configuration interface, and no console commands are required.

Baud Rate Conversion: This function allows a single master device to communicate with slave devices using different baud rates and data formats.

Modbus RTU/ASCII Conversion: This function allows a single Modbus RTU/ASCII master device to communicate with Modbus RTU/ASCII slave devices using different protocols, baud rates and data formats.

Two Masters Share One Slave(for tSH-73x Series only): This function allows two master devices connected to different serial ports to share slave devices.

Read-Cache Function: The built-in cache function reduces the loading of serial communication on the slave port by removing duplicated queries when the two master devices are requesting the same information.

Factory, Building and Home Automation Accessing a Process Controller from Local Panel and Control Center
CPU Module
CPU 32-bit ARM
COM Ports
Ports 1 x RS-485 (3000VDC Signal Isolation)
2 x 3-wire RS-232 (3000VDC Signal Isolation)
Baud Rate 115200 bps Max.
Bias Resistor Yes, 1 KΩ
Parity None, Odd, Even, Mark, Space
Data Bit 5, 6, 7, 8
Stop Bit 1, 2
Node Address RS-485 254 Nodes(max.)
Ethernet
Ports 10/100 Base-TX, 8-pin RJ-45 x 1 (Auto-negotiating, Auto-MDI/MDIX, LED indicator)
PoE (IEEE 802.3af, Class 1)
Power
Consumption 0.07 A @ 24 VDC
Mechanical
Casing Plastic
Dimensions (mm) 52 mm x 95 mm x 27 mm (W x H x D)
Installation DIN-Rail Mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
tSH-734i     CR Tiny (2x Isolated RS-232 and 1x Isolated RS-485) Serial Port Sharer with PoE (RoHS)
Includes CA-002 Cable
Data Sheet
TOP HOME