Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module PoE Ethernet Modbus TCP 2 kênh DI+ 2 kênh Relay Output ICP DAS tPET-P2R2 CR

Module PoE Ethernet Modbus TCP 2 kênh DI+ 2 kênh Relay Output ICP DAS tPET-P2R2 CR

Tiny PoE Ethernet Module with 2-ch Wet Contact DI and 2-ch Power Relay

Chia sẻ:
Model: tPET-P2R2 CR
Views: 609

Module PoE Ethernet Modbus TCP 2 kênh DI+ 2 kênh Relay Output ICP DAS tPET-P2R2 CR

Providing various digital I/O functions, the tET/tPET series is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the tET/tPET series perfect integration with the HMI, SCADA, PLC and other software systems.

The functionality of the tET/tPET series is almost the same as the ET-7000/PET-7000 series. The tET/tPET series tiny Ethernet I/O modules support various I/O types, like photo-isolated digital input, relay contact, photoMOS relay, and open-collector output. The module can be used to create DI to DO pair-connect through the Ethernet. Once the configuration is completed, the tET/tPET series module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.

The tET/tPET series provides dual watchdog: CPU watchdog and host watchdog. The CPU watchdog automatically resets it-self when the built-in firmware runs abnormally. The host watchdog monitors the host controller (PC or PLC), and the output of the module can go to predefined state (safe value) when the host fails.

For maximum space savings, the tET/tPET series is offered in an amazing tiny form-factor that makes it can be easily installed in anywhere, even directly embedded into a machine. It is equipped with two removable terminal block connectors for easy wiring, and features a powerful 32-bit ARM MCU to handle efficient network trafficking. The tPET series offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. When there is no PoE switch on site, the tPET series accepts power input from DC adapter.

 

  • Factory, Building and Home Automation
  • Remote Maintenance
CPU Module
CPU 32-bit MCU
Watchdog Timer Yes
LED Indicators
Status 1 x Power, 2 x Ethernet, 1 x PoE
Digital Input
Channels 2
Type Wet Contact (Sink, Source)
Wet Contact, ON Voltage Level +10 VDC ~ +50 VDC
Wet Contact, OFF Voltage Level +4 VDC max.
Isolation 3750 Vrms
Input Impedance 10 k Ohm
Overvoltage Protection +70 VDC
Digital Input/Counter
Max. Counts 4,294,967,285 (32 bits)
Frequency 3.5 kHz (without filter)
Min. Pulse Width 0.15 ms
Relay Output
Channels 2
Type Power Relay, Form A (SPST N.O.)
Operate Time 6 ms
Release Time 3 ms
Electrical Endurance 5 A 250 VAC 30,000 ops (10 ops/minute) at 75 °C
5 A 30 VDC 70,000 ops (10 ops/minute) at 75 °C
5 A 250 VAC/30 VDC 6,000 ops
3 A 250 VAC/30 VDC 100,000 ops
Mechanical Endurance 20,000,000 ops. At no load (300 ops./ minute)
Isolation 3000 Vrms
Ethernet
Ports 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicator)
Power
Consumption 0.03 A @ 48 VDC
Powered from PoE IEEE 802.3af, Class 1
Powered from Terminal Block +12 ~ 48 VDC
Mechanical
Dimensions (mm) 52 mm x 27 mm x 98 mm
Installation DIN-Rail mounting
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
tPET-P2R2     CR Tiny PoE Ethernet Module with 2-ch Wet Contact DI and 2-ch Power Relay (RoHS)

 

PETL7000/tET/tPET Series Main Page

TOP HOME