Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module Ethernet Modbus TCP 4 kênh đầu ra (DO) ICP DAS tET-A4 CR

Module Ethernet Modbus TCP 4 kênh đầu ra (DO) ICP DAS tET-A4 CR

Tiny Ethernet Module with 4-ch Source-type DO

Chia sẻ:
Model: tET-A4 CR
Views: 602

Module Ethernet Modbus TCP 4 kênh đầu ra (DO) ICP DAS tET-A4 CR

Providing various digital I/O functions, the tET/tPET series is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the tET/tPET series perfect integration with the HMI, SCADA, PLC and other software systems.

The functionality of the tET/tPET series is almost the same as the ET-7000/PET-7000 series. The tET/tPET series tiny Ethernet I/O modules support various I/O types, like photo-isolated digital input, relay contact, photoMOS relay, and open-collector output. The module can be used to create DI to DO pair-connect through the Ethernet. Once the configuration is completed, the tET/tPET series module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.

The tET/tPET series provides dual watchdog: CPU watchdog and host watchdog. The CPU watchdog automatically resets it-self when the built-in firmware runs abnormally. The host watchdog monitors the host controller (PC or PLC), and the output of the module can go to predefined state (safe value) when the host fails.

For maximum space savings, the tET/tPET series is offered in an amazing tiny form-factor that makes it can be easily installed in anywhere, even directly embedded into a machine. It is equipped with two removable terminal block connectors for easy wiring, and features a powerful 32-bit ARM MCU to handle efficient network trafficking. The tPET series offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. When there is no PoE switch on site, the tPET series accepts power input from DC adapter.

  • Factory, Building and Home Automation
  • Remote Maintenance
CPU Module
CPU 32-bit MCU
Watchdog Timer Module, Communication (Programmable)
LED Indicators
Status Run, Ethernet
Digital Output
Channels 4
Type Open Collector
Sink/Source (NPN/PNP) Source
Load Voltage +10 to +40 VDC
Load Current 650 mA/channel
Overvoltage Protection +48 VDC
Short-circuit Protection Yes
Isolation 3750 Vrms
Ethernet
Ports 10/100 Base-TX, 8-Pin RJ-45 x1 (Auto-negotiating, Auto-MDI/MDIX, LED indicator)
Power
Powered from Terminal Block +12 to +48 VDC
Mechanical
Dimensions (mm) 52 x 95 x 27 (W x L x H)
Installation DIN-Rail mounting
Environment
Operating Temperature -25 to +75 °C
Storage Temperature -30 to +80 °C
Humidity 10 to 90% RH, Non-condensing
tET-A4     CR Tiny Ethernet Module with 4-ch Source-type DO (PNP) (RoHS)
TOP HOME