Trang chủ » Bo mạch I/O kết nối máy tính (PC Boards) » Card ISA điều khiển khiển động cơ bước / servo 2 trục (2-axis independent) ICP DAS STEP-200

Card ISA điều khiển khiển động cơ bước / servo 2 trục (2-axis independent) ICP DAS STEP-200

ISA Bus, 2-axis High-speed Stepper Motor Control Card (Limited Functions and Economical)
Includes: Include: CA-PC25M (25-pin Male D-Sub Connector with Plastic Cover)

Tính năng

Card ISA điều khiển khiển động cơ bước / servo 2 trục (2-axis independent) ICP DAS STEP-200

  • 2-axis independent, simultaneous stepper motor control/servo motor control (Pulse input type)
  • Drivers for DOS, Windows 95/98/ME, Windows NT
  • Embedded Microprocessor
  • Command Type Interface
  • Linear and circular interpolation
  • Acceleration/deceleration: Automatic trapezoidal acceleration/deceleration
  • Output polarity can be programmable
  • 5 optical isolated digital inputs per axis for limit switches

 

Chia sẻ:
Model: STEP-200
Views: 637

Card ISA điều khiển khiển động cơ bước / servo 2 trục (2-axis independent) ICP DAS STEP-200

The STEP-200 is a 2-axis, command-based stepper motor controller board for IBM PC/XT/AT bus-compatible devices. The board can also be used for pulse-type servo motor control (pulse input type). The board includes a build-in μP that performs a variety of motion control commands and shares the loading of the host computer. A 2 KB FIFO is included as a command buffer, which provides a buffer time of 1360 ms. The hardware architecture of STEP-200 is ideal for the Windows operating system, and drivers for DOS and Windows are provided offering real-time motion control solutions for Windows systems.

  • Semiconductor Manufacturing
  • Component Inspection
  • Manufacturing Quality Control
  • Food and Beverage Inspection
  • Microscopy and Medical Imaging
  • Biometrics Applications
  • X-Y-Z Table
  • Fix-pitch Stamping Machinery
  • Transfer Machinery
  • Spinner
  • Load/Unload

PC-based-solution

Application System Structure

Software
OS Support Windows 95/98/ME/NT4.0
SDK DOS 6.2
Hardware
Connector 25-pin D-Sub
General
No. of Axes 2
Operation Mode Open loop
Speed Profile T-curve
Position Control Mode Incremental mode and absolute mode
Command Type Pulse command
Axis I/O
Servo Interface Output SVON
Mechanical Switch Input Home, forward, backward limit, EMG
Position Compare Output 10 KHz
Encoder Input
Ring Counter Mode 32-bit
Pulse Output
Mode CW/CCW, PULSE/DIR
Counter Width 32-bit
Rate 250 KHz (Max.)
Digital Input
Isolation 2500 Vrms optical isolation
Digital Output
Isolation 2500 Vrms optical isolation
PC Bus
Type ISA bus
Power
Consumption +5 V @ 500 mA
Environment
Operating Temperature 0 ~ +50°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, non-condensing
STEP-200  ISA Bus, 2-axis High-speed Stepper Motor Control Card (Limited Functions and Economical)
Includes: Include: CA-PC25M (25-pin Male D-Sub Connector with Plastic Cover)
Quick Guide
TOP HOME