Trang chủ » Industrial Communication » Switch công nghiệp 8 cổng Redundant Ring Ethernet ICP DAS RS-408 CR

Switch công nghiệp 8 cổng Redundant Ring Ethernet ICP DAS RS-408 CR

8-port Redundant Ring Switch with Isolated Power Input +10 VDC ~ +30 VDC

Chia sẻ:
Model: RS-408 CR
Views: 498

Switch công nghiệp 8 cổng Redundant Ring Ethernet ICP DAS RS-408 CR

The RS-408 is a 8-port Industrial Ethernet (10/100 Base-TX) Real-time Redundant Ring Switch. RS-408 supports 10/100M auto negotiation feature and auto MDI/MDI-X function, it can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. Built-in ICP DAS Cyber-Ring technique enables multiple switches to be placed into a redundant ring. Typically the switch detects and recovers from a copper link failure within approximately 20 ms – for the majority of applications, it is seamless process. The RS-408 is much more easy to use and absolutely free of software setting. After unpacking the shipping case, it just takes one or two dip or rotary switch to make it work. RS-408 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source will act as a backup to automatically support the it’s power needs. And the relay output facility can deliver warning signal while power or network link failure.

Built-in ICP DAS Cyber-Ring technique enables multiple switches to be placed into a redundant ring. Typically the switch detects and recovers from a copper link failure within approximately 20 ms – for the majority of applications, it is seamless process. The RS-408/RSM-408 series is much more easy to use and absolutely free of software setting. After unpacking the shipping case, it just takes one or two dip or rotary switch to make it work.

RS-408/RSM-408 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source will act as a backup to automatically support the it’s power needs. And the relay output facility can deliver warning signal while power or network link failure.

 

Models RS-408 RSM-408
Technology
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Addresses 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Interface
RJ-45 Ports 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, 10/100M, Link/Act, Master
Ethernet Isolation 1500 Vrms 1 minute
COM1 RS-232 (TxD, RxD and GND); Non-isolated
COM2 RS-485 (D2+, D2-; self-tuner ASIC inside); Non-isolated
Frame Ground for EMS Protection Yes
Power
Input Voltage Range +10 VDC ~ +30 VDC Redundant Dual Inputs (Isolated)
Power Consumption 0.3 A @ 24 VDC
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Connector 7-Pin Removable Terminal Block
Mechanical
Casing Plastic Metal
Environmental Rating Flammability UL 94V-0 IP30 Protection
Dimensions (W x L x H) 64 mm x 98 mm x 118 mm 73 mm x 102 mm x 132 mm
Installation DIN-Rail Mounting DIN-Rail Mounting or Wall Mounting
Environmental
Operating Temperature -40 °C ~ + 75 °C
Storage Temperature -40 °C ~ + 85 °C
Ambient Relative Humidity 10 ~ 95% RH, non-condensing
Accessories
Included Cable CA-090510 x 1
RS-408     CR 8-port Redundant Ring Switch with Isolated Power Input +10 VDC ~ +30 VDC (RoHS)
CA-090510 9-Pin Female D-Sub & RJ-45 Cable, 1 M Cab
MDR-20-24 24 V/1 A, 24 W Power Supply with DIN-Rail Mounting
MDR-60-48 48 V/1.25 A, 60 W Power Supply with DIN-Rail Mounting
DIN-KA52F 24 V/1.04 A, 25 W Power Supply with DIN-Rail Mounting
DR-120-24 24 V/5 A, 120 W Power Supply with DIN-Rail Mounting
TOP HOME