Trang chủ » Accessories » Power Supplies » Module nguồn cung cấp công nghiệp dự phòng 100W ICP DAS RPS-100 CR

Module nguồn cung cấp công nghiệp dự phòng 100W ICP DAS RPS-100 CR

Industrial Redundant Power Supply 100W Power Module

Chia sẻ:
Model: RPS-100 CR
Views: 581

Module nguồn cung cấp công nghiệp dự phòng 100W ICP DAS RPS-100 CR

The RPS-100 can return various real-time information of itself, including load current, temperature, existence, malfunction etc. The information not only can be used to evaluate the health condition of the RPS-100 itself, but also can be record to estimate the power consumption of the whole system, and an instant warning can be sent when abnormal power consumption occurs. Through the information, user can easily implement predictive alarm and fault alarm function for the system. In addition, the RPS-100 can also record the using time of itself by the communication module, which can be used as a basis for maintenance and replacement and estimate MTBF (Mean Time Between Failures). When the RPS-100 has reached the recommended service life, user can replace it early to make the power system more reliable and stable. The RPS-100 has a built-in load balancing function, so there is no need to add extra load balancing modules. In addition, the RPS-100 adopts a slot-type design, and it supplies hot swapping function, so when user replaces the RPS-100, there is no need to turn off the power system. In comparison to the traditional power supply, the RPS-100 saves the trouble of wiring, and it is simpler and safer.
Safety
Standard Design to meet 62368
EMC
Standard • EN 61000-3-2
• EN 61000-3-3
• EN 61204-3
• IEC 61000-4-2(ESD): ±4 kV for Contact
• IEC 61000-4-3
• IEC 61000-4-4(EFT): ±2 kV for power line
• IEC 61000-4-5(Surge): ±2 kV for power line
• IEC 61000-4-6
• IEC 61000-4-8
• IEC 61000-4-11
LED Indicators
Status 2, PWR, DC_Fail
General
Hot Swap Yes, for power modules
Load Balance Yes
Input
Voltage Range 90 ~ 264 VAC
Frequency Range 47 ~ 63Hz
Ac Current (Typ.) 1.01A/115VAC, 0.51A/230VAC
Inrush Current (Typ.) COLD START 30A/115VAC 60A/230VAC
Leakage Current Earth<3.5mA , Touch<0.25mA
Output
Ripple & Noise (Max.) 50mVp-p
Voltage Adj. Range 23 ~ 25V
Voltage Tolerance ±1.0%
Line Regulation ±1.0%
Load Regulation ±3.0%
Setup, Rise Time 1300ms,120ms at full load
Hold Up Time (Typ.) 30ms at full load
DC Voltage 24V
Rated Power 100W
Rated Current 4.16A
Efficiency 86% typical
Protection
Over Voltage 110%~200% (Automatic recovery)
Overload 26.4~31.2 (Automatic recovery)
Mechanical
Casing metal
Dimensions (mm) 46 x 133 x 148 (W x L x D)
Environmental
Operating Temperature -20 ~ +50 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
RPS-100     CR Industrial Redundant Power Supply 100W Power Module. (RoHs)
TOP HOME