Trang chủ » Truyền thông công nghiệp » Module Profibus Slave 8 kênh đầu vào số cách ly (DI)+4 kênh đầu ra Relay ICP DAS PROFI-5060 CR

Module Profibus Slave 8 kênh đầu vào số cách ly (DI)+4 kênh đầu ra Relay ICP DAS PROFI-5060 CR

PROFIBUS Remote I/O Module (8-channel Isolated Digital Input and 4-channel Relay Output)

Chia sẻ:
Model: PROFI-5060 CR
Views: 882

Module Profibus Slave 8 kênh đầu vào số cách ly (DI)+4 kênh đầu ra Relay ICP DAS PROFI-5060 CR

The PROFI-5060 is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 8-channel isolated digital input and 4-channel relay output. Users can easily to choose and configure it by using the GSD file in any PROFIBUS Configurator.

  • Industrial Automation
  • Factory Automation
  • Process Automation
  • Etc…
LED Indicators
Status PWR LED, RUN LED
Digital Input
Channels 8 Channels (Sink or Source), Isolated from each other
Off Voltage Level: +1V Max. On Voltage Level: +4 ~ +30V
Input Impedance: 3KΩ in series with opto-coupler
Isolation Voltage: 3750Vrms
Digital Output
Channels 4 Channels (Form C )
Contact Rating: 0.6A@125VAC, 2A@30VDC
Operating Time: 3ms. Release Time: 2ms. (Typical)
Minimum Life: 500,000 Ops.
PROFIBUS
Controller Profichip VPCLS2
Transceiver ADI ADM2486
Baud Rate 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol DP-V0
Power
Consumption 1 W
Mechanical
Dimensions (mm) 91 x 128 x 52 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75℃
Storage Temperature -30 ~ +80 ℃
Humidity 10 ~ 90% RH, Non-condensing
PROFI-5060     CR PROFIBUS Remote I/O Module (8-channel Isolated Digital Input and 4-channel Relay Output) (RoHS)
TOP HOME