Trang chủ » Truyền thông công nghiệp » Bộ chuyển đổi Modbus gateway 1 cổng RS-232+1 cổng RS-485 sang Ethernet (PoE) ICP DAS PPDS-720-MTCP CR

Bộ chuyển đổi Modbus gateway 1 cổng RS-232+1 cổng RS-485 sang Ethernet (PoE) ICP DAS PPDS-720-MTCP CR

Programmable (1x RS-232 and 1x RS-485) Serial-to-Ethernet Device Server with PoE and Modbus Gateway

Chia sẻ:
Model: PPDS-720-MTCP CR
Views: 1695

Bộ chuyển đổi Modbus gateway 1 cổng RS-232+1 cổng RS-485 sang Ethernet (PoE) ICP DAS PPDS-720-MTCP CR

The PDS-700 series is a family of Programmable Device Servers, also known as “Serial-to-Ethernet gateway”, that are designed for linking RS-232/422/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-700 series into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-700 series is able to meet the demands of every network-enabled application.

The PDS-700 series includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-700 up in just one second and gives you fastest response. It also works as a Modbus TCP to RTU/ASCII gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.

The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE.

The PDS-720(D) and PPDS-720(D)-MTCP is equipped with 1 RS-232 port and 1 RS-485 port. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.

  • Factory Automation
  • Building Automation
  • Home Automation
Model Name PDS-720(D) PPDS-720(D)-MTCP
CPU
CPU 80186-80 MHz or compatible
SRAM 512 KB
Flash Memory Flash ROM: 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles
Built-in Watchdog Timer Yes
Communication Interface
Non-isolated COM1 RS-232 (TxD, RxD, RTS, CTS, GND)
COM2 RS-485 (D2+, D2-, GND)
RS-485 Bias Resistor Yes, 1 KΩ
Node 254 (max.)
Ethernet 10/100 Base-TX, RJ-45 port
(Auto-negotiating, auto MDI/MDI-X, LED indicator)
PoE IEEE 802.3af
COM Port Formats
Data Bit 7, 8: for COM1 and COM2
Parity None, Even, Odd, Mark, Space
None parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Stop Bit 1, 2: for COM1 ~ COM2
Baud Rate 115200 bps Max.
LED Indicators
5-digit 7 Segment Yes, only for “D” versions
System Red
PoE IEEE 802.3af
Power
Protection Power Reverse Polarity Protection
Required Supply Voltage +10 VDC ~ +30 VDC (non-regulated) PoE or +12VDC ~ +48 VDC (non-regulated)
Power Consumption PDS-720: 2.0 W
PDS-720D: 2.7 W
PPDS-720-MTCP: 2.2 W
PPDS-720D-MTCP: 2.9 W
Mechanism
Flammability Fire Retardant Materials (UL94-V0 Level)
Dimension (W x H x D) 72 mm x 112 mm x 35 mm
Installation DIN-Rail or Wall mounting
Casing Fire Retardant Plastic
Environment
Operating Temperature -25 to +75 °C
Storage Temperature -40 to +80 °C
Humidity 5 to 90% RH, non-condensing
PPDS-720-MTCP     CR Programmable (1x RS-232 and 1x RS-485) Serial-to-Ethernet Device Server with PoE and Modbus Gateway (RoHS)
Includes CA-0910 Cable
GPSU06U-6 24 VDC/0.25 A, 6 W Power Supply
MDR-20-24 CR 24 VDC/1 A, 24 W Power Supply with DIN-Rail Mounting
CA-0903 9-Pin Female D-sub and RS-232 connector cable, 30 cm Cable   <Pin Assignment>
CA-0910 9-Pin Female D-sub and 3-wire RS-232 cable, 1 M Cable   <Pin Assignment>
NS-205 CR Unmanaged 5-Port Industrial Ethernet Switch (RoHS)
DIN-KA52F-48 48 VDC/0.52 A, 25 W Power Supply with Din-Rail Mounting
NS-205PSE CR Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
TOP HOME