Trang chủ » Quản lý năng lượng thông minh » Bộ đo điện thông minh » Bộ đo điện thông minh 3 pha ICP DAS PM-3133/-MTCP/-CPS

Bộ đo điện thông minh 3 pha ICP DAS PM-3133/-MTCP/-CPS

Three-phase Smart Power Meter

Features

Bộ đo điện thông minh 3 pha ICP DAS PM-3133/-MTCP/-CPS

  • True RMS Power Measurements
  • Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W
  • Current Measurements Up to 400 A with Different CT Ratio
  • Voltage Measurements Up to 500 V
  • Clip-on CT for Easy Installation
  • W Accuracy Better than 0.5% (PF=1)
  • Supports RS-485, Ethernet (PoE) or CANopen Interface
  • Supports Modbus RTU, Modbus TCP or CANopen Protocol
  • Supports 2 Power Relay Output (Form A)
  • Total Harmonic Distortion (THD)
Chia sẻ:
Model: PM-3133/-MTCP/-CPS
Views: 491

ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-3000 series that gives you access to real-time electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-3000 series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 400 A). It operates over a wide input voltages range 10 ~ 500 VAC which allows worldwide compatibility. And with 2 channels relay outputs, it can be linked with sirens or lightings for alarm messages. It also supports Modbus RTU, Modbus TCP or CANopen protocols for easy integration.

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote diagnosis and Testing Equipment
  • etc.
Model PM-3133 PM-3133-MTCP PM-3133-CPS
AC Power Measurement
Wiring 3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Input Voltage 10 ~ 500 V
Input Current CTØ10 mm (60 A); CTØ16 mm (100 A); CTØ24 mm (200 A); CTØ36 mm (300 A); CTØ36 mm (400 A)
Input Frequency 50/60 Hz
W Accuracy Better than 0.5% (PF=1)
Power Parameter Measurement True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power (kVA), Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency
Data Update Rate 1 Second
Communication
RS-485 Protocol Modbus-RTU – –
Baud rate 9600,19200 (default), 38400, 115200;
DIP Switch Selectable		 – –
Data format N,8,1 (default); N,8,2; E,8,1; E,8,2; O,8,1; O,8,2 – –
Isolation 3000 VDC – –
Ethernet (PoE) Protocol – MODBUS TCP; Speed 100 Mbps –
CANopen Protocol – – CAN and CANopen
Baud rate – – 125 k (default), 250 k, 500 k,
1 M; DIP Switch Selectable
Isolation – – 3000 VDC
Alarm Output
Power Relay Form A (Normal Open) x 2; Relay Contact Voltage Range: 5 A @ 250 VAC (47 ~ 63Hz), 5 A @ 30 VDC
Power
Input Range +12 ~ 48 VDC
Power Consumption 2 W
Mechanical
Casing Plastic
Dimensions (W x L x H) 127 mm x 105 mm x 33 mm
Module Installation DIN-Rail Mounting
CT Installation Clip-On
Environment
Operating Temperature -20 ~ +70 °C
Storage Temperature -25 ~ +80 °C
Ambient Relative Humidity 10% ~ 90% RH, Non-condensing
RS-485 Interface
PM-3133P Modbus RTU, 3-phase power meter (Without CTs, the PM-3133P should be directly connected to the 333mV CT)
PM-3133-100 Modbus RTU, 3-phase power meter; includes 60A CT (Inside diameter 10mm; wire lead 1.8m) x 3
PM-3133-160 Modbus RTU, 3-phase power meter; includes 100A CT (Inside diameter 16mm; wire lead 1.8m) x 3
PM-3133-240 Modbus RTU, 3-phase power meter; includes 200A CT (Inside diameter 24mm; wire lead 1.8m) x 3
PM-3133-100P Modbus RTU, 3-phase power meter; includes 60A CT (Inside diameter 10mm; wire lead 4m) x 3
PM-3133-160P Modbus RTU, 3-phase power meter; includes 100A CT (Inside diameter 16mm; wire lead 4m) x 3
PM-3133-240P Modbus RTU, 3-phase power meter; includes 200A CT (Inside diameter 24mm; wire lead 4m) x 3
PM-3133-360P Modbus RTU, 3-phase power meter; includes 300A CT (Inside diameter 36mm; wire lead 4m) x 3
PM-3133-400P Modbus RTU, 3-phase power meter; includes 400A CT (Inside diameter 36mm; wire lead 4m) x 3
Ethernet Interface
PM-3133-100-MTCP Modbus TCP, 3-phase power meter; includes 60A CT (Inside diameter 10mm; wire lead 1.8m) x 3
PM-3133-160-MTCP Modbus TCP, 3-phase power meter; includes 100A CT (Inside diameter 16mm; wire lead 1.8m) x 3
PM-3133-240-MTCP Modbus TCP, 3-phase power meter; includes 200A CT (Inside diameter 24mm; wire lead 1.8m) x 3
PM-3133-360P-MTCP Modbus TCP, 3-phase power meter; includes 300A CT (Inside diameter 36mm; wire lead 4m) x 3
PM-3133-400P-MTCP Modbus TCP, 3-phase power meter; includes 400A CT (Inside diameter 36mm; wire lead 4m) x 3
CANopen Interface
PM-3133-100-CPS CANopen, 3-phase power meter; includes 60A CT (Inside diameter 10mm; wire lead 1.8m) x 3
PM-3133-160-CPS CANopen, 3-phase power meter; includes 100A CT (Inside diameter 16mm; wire lead 1.8m) x 3
PM-3133-240-CPS CANopen, 3-phase power meter; includes 200A CT (Inside diameter 24mm; wire lead 1.8m) x 3
Data Sheet icon_manual icon_software_indusoft
TOP HOME