Link youtube Link facebook
Trang chủ » Card PCI Bus FRnet Master điều khiển chuyển động 8 trục (High-speed 8-axis Motion) ICP DAS PISO-PS810

Card PCI Bus FRnet Master điều khiển chuyển động 8 trục (High-speed 8-axis Motion) ICP DAS PISO-PS810

PCI Bus, High-speed 8-axis Motion Control Card with FRnet Master

Model: PISO-PS810

---
Views: 424
3.3 (66.67%) 6 votes
Chia sẻ:

Giới thiệu

Card PCI Bus FRnet Master điều khiển chuyển động 8 trục (High-speed 8-axis Motion) ICP DAS PISO-PS810

The PISO-PS810 is a 8-axis stepping/pulse-type servo motor control card that can be used on any IPC with a 5 V or 3.3 V PCI bus, and is suitable for general-purpose motion applications. This card equipped with one FRnet Master which allows the fast remote I/O of the IPC to be expanded easily. The two-wired FRnet interface allows a maximum 128 DI and 128 DO channels, which are automatically scanned within a period of 0.72 ms.

In addition to its wide speed range, this intelligent motion controller also has a variety of motion control functions built in, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/deceleration, numerous synchronous actions, automatic homing, and others. A major advantage is that the majority of the PISO-PS810 motion control functions are performed by the high-performance motion ASIC with little load on the processor. The motion status, FRnet I/O, and the other I/O cards on the IPC can still be monitored while driving the motors. As the low CPU loading requirements of the PISO-PS810 is minimal, one or more motion cards can be used with a single IPC.

ICP DAS also provides a variety of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-effective solution for motion control application developers.

TOP HOME

Tính năng

 

TOP HOME

Thông số kỹ thuật I/O

General
Number of Axes 8
Slot Interface Universal PCI Bus
Pulse Output Rate 4 MHz (Max.)
Command Type Pulse Command
Resolution 32-bit
Pulse Output Mode CW/CCW, PULSE/DIR
Operation Mode Semi-closed Loop
Linear Interpolation 2 groups of 2 to 3 axes Interpolation
Circular Interpolation 2 groups of 2 axes Interpolation
Speed Curve Profile T/S-curve
Synchronous Action 10 activation factors and 14 actions
Ring Counter Mode 32-bit
Position Control Mode Incremental mode and Absolute mode
Position Compare Trigger 4 MHz
Encoder Interface A/B pulse, Up/Down
Encoder Counter 32-bit
Encoder Counting Rate 4 MHz (Max.)
I/O Isolation 2500 Vrms optical isolation
Connector 100-pin VHDCI
Motion Relative I/O
Mechanical Switch Input Home, LMT+/-, NHOME, EMG
Servo I/O Interface Input: INP, ALM
Output: SVON, ALM_RST, ERC
Digital Input
Digital Input Channels Local: 8 DI
Expandable: 128 DI
Digital Output
Digital Output Channels Local: 8 DO
Expandable: 128 DO
Power
Power Consumption +5 V @ 500 mA
Environmental
Operating Temperature -20 ~ +75°C
Storage Temperature -30 ~ +85°C
Ambient Relative Humidity 5 ~ 90% RH, non-condensing
Software Support
Windows Driver/DLL/Lib Windows 7 32/64-bit
Windows XP/2000 32-bit
DOS Library
Labview Development Kit
Linux Library
TOP HOME

Thông tin mua hàng

PISO-PS810 PCI Bus, High-speed 8-axis Motion Control Card with FRnet Master
TOP HOME

Phụ kiện

DN-84100U Universal Snap-on Wiring Terminal Board for PISO-PS410 and PISO-PS810
CA-MINI100-15 100-pin VHDCI to SCSI-II Connector Cable, Length 1.5 M
TOP HOME