Link youtube Link facebook
Trang chủ » Card PCI Bus điều khiển tốc độ 4 trục với FRnet Master ICP DAS PISO-PS400U

Card PCI Bus điều khiển tốc độ 4 trục với FRnet Master ICP DAS PISO-PS400U

Universal PCI Bus, High-speed 4-axis Motion Control Card with FRnet Master

Model: PISO-PS400U

Views: 73
Đánh giá bài viết
Chia sẻ:

Introduction

Card PCI Bus điều khiển tốc độ 4 trục với FRnet Master ICP DAS PISO-PS400U

The PISO-PS400(U) are 4-axis stepping/pulse-type servo motor control card that can be used on any IPC with PCI bus, and is suitable for general-purpose motion control applications. These card equipped with one FRnet Master which allows the fast remote I/O of the IPC to be expanded easily. The two-wired FRnet interface allows a maximum 128 DI and 128 DO channels, which are automatically scanned within a period of 2.88 ms.

In addition to its wide speed range, this intelligent motion controller also has a variety of motion control functions built in, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/deceleration, numerous synchronous actions, automatic homing, and others. A major advantage is that the majority of the PS400 series motion control functions are performed by the high-performance motion ASIC with little load on the processor. The motion status, FRnet I/O, and the other I/O cards on the IPC can still be monitored while driving the motors.

As the low CPU loading requirements of the PS400 series is minimal, one or more motion cards can be used with a single IPC. ICP DAS also provides a variety of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-effective solution for motion control application developers.

Features

TOP HOME

Applications

Applications

  • Semiconductor Manufacturing
  • Component Inspection
  • Manufacturing Quality Control
  • Food and Beverage Inspection
  • Microscopy and Medical Imaging
  • Biometrics Applications
  • X-Y-Z Table
  • Fix-pitch Stamping Machinery
  • Transfer Machinery
  • Spinner
  • Load/Unload

TOP HOME

Specifications

Software
OS Support Windows 7/10 32/64-bit
Windows XP/2000 32-bit
Utility EzGo Utility
Labview Labview 5.0 ~ Labview 8.x
Hardware
Connector 68-pin SCSI-II connector
General
Synchronous Action 10 activation factors
and 14 actions
Speed Profile T/S-curve
Position Control Mode Incremental mode
and Absolute mode
Operation Mode Semi-closed Loop
No. of Axes 4
Isolation (with DN-8468)2500 Vrms optical isolation
Command Type Pulse Command
Axis I/O
Servo Interface Output SVON
Mechanical Switch Input Home, LMT+/-,
NHOME, EMG
Position Compare Output 10 KHz (X and Y only)
Servo Interface Input INP, ALM
Encoder Input
Ring Counter Mode 32-bit
Mode A/B pulse, Up/Down
Counting Rate 4 MHz (Max.)
Counter Width 32-bit
Pulse Output
Counter Width 32-bit
Mode CW/CCW, PULSE/DIR
Rate 4 MHz (Max.)
Interpolation
Cicular Any 2 axes
Linear Any 2 to 3 of 4 axes
Digital Input
Channels Local: 4 DI
Expandable: 128 DI
Digital Output
Channels Local: 4 DO
Expandable: 128 DO
PC Bus
Type 3.3 V/5 V Universal PCI
Power
Consumption +5 V @ 500 mA
Environmental
Operating Temperature -20 ~ +75°C
Storage Temperature -30 ~ +85°C
Humidity 5 ~ 85% RH, non-condensing
TOP HOME

Odering information

PISO-PS400U Universal PCI Bus, High-speed 4-axis Motion Control Card with FRnet Master
TOP HOME