Trang chủ » Bo mạch I/O kết nối máy tính (PC Boards) » Card PCI 2 cổng CAN 32-bit MCU ICP DAS PISO-CM200U-T CR

Card PCI 2 cổng CAN 32-bit MCU ICP DAS PISO-CM200U-T CR

2-port CAN Programmable Universal PCI Card

Chia sẻ:
Model: PISO-CM200U-T CR
Views: 425

Card PCI 2 cổng CAN 32-bit MCU ICP DAS PISO-CM200U-T CR

A Controller Area Network (CAN) is a serial communication system based on the CAN protocol that enables efficient distributed real-time control combined with a very high level of security. The CAN protocol is especially suited for structuring “intelligent” device networks, as well as for building automatic control environments that contain sensors and actuators within a system or sub-system. In a CAN network, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted.

The PISO-CM200U is a very powerful and economic solution for an active CAN board, containing two CAN channels that cover a wide range of CAN applications. The 32-bit on-board microcontroller allows the filtering, pre-processing, and storage of CAN messages (with a timestamp), as well as real-time transmission of CAN messages, among many other features.

An added benefit is that custom CAN Bus applications can be developed using the PISO-CM200U library. When the PISO-CM200U is active, data exchange between the custom application and the CAN Bus firmware is performed via the memory mapping method on the PISO-CM200U.

  • Embedded 32-bit microprocessor
  • NXP 82C250 CAN transceiver
  • Bosch C_CAN controller
  • Supports both CAN 2.0A and CAN 2.0B specifications
  • Storage Timestamp with a precision of at least ±1 ms
  • Board number selectable via DIP switch
  • Dual port RAM communication mechanism
  • Embedded RTC (real time clock)
  • Transmission/reception buffer for up to 256 CAN messages
  • Allows a maximum of 5 sets of cyclic transmission messages
  • Cyclic transmission message precision: ±1ms
  • Easy to update firmware

Model Name PISO-CM200U-D PISO-CM200U-T
CPU 32-bit MCU
RTC (Real Time Clock) Yes
Bus Interface
Type Universal PCI, 5 V, 33 MHz, 32-bit, plug and play
Board No. Configurable via DIP switch
CAN Interface
Controller Bosch C_CAN
Transceiver NXP 82C250
Channel number 2
Connector 9-pin Male D-Sub 5-pin screw terminal block
Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (user-defined Baud Rate allowed)
Isolation 3000 VDC for DC-to-DC, 3000 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor
LED Indicators/Display
System LED Indicators Yes, two (round) as Communication Indicators, Rx/Tx, ERR
Power Consumption 800 mA @ 5 V
Driver Windows XP/7/8.1/10 (32-bit/64-bit) OS
Library/Demo Languages C#.Net, VB.Net, VC++.Net
Dimensions (L x W x D) 150 mm x 121 mm x 22 mm
Operating Temp. 0 to 60℃
Storage Temp. -20 to 70℃
Humidity 5 to 85% RH, Non-condensing
PISO-CM200U-T     CR 2-port Programmable CAN Universal PCI Card with 5-Pin Screw Terminal Connector (RoHS)