Card PCI 2 cổng CAN FD ICP DAS PISO-CAN200U-FD-T CR
CAN FD (CAN with Flexible Data-Rate) is a newer extension version of the CAN 2.0 protocol. It was developed by Bosch and was released in 2012. It has been significantly improved during the standardization process and is nowadays in ISO 11898-1:2015. The CAN FD speeds up the data transmission and packs more data into each message.
PISO-CAN200U-FD-T is a very powerful and economic solution for an active CAN board. It has two independent CAN bus communication ports with 5-pin screw terminal connector, and has the ability to cover a wide range of CAN FD applications. It uses Microchip CAN FD controllers and TI TCAN1042HG series transceivers, which provide bus arbitration and error detection features, combined with auto-correction and re-transmission functionality.
| Software |
| Driver |
Windows 7/8.1/10 (32-bit/64-bit OS) |
| Library |
C#.Net, VB.Net, VC++.Net |
| PC Bus |
| Type |
Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, plug and play |
| Board No. |
Configurable via DIP switch |
| CAN |
| Controller |
Microchip MCP2518FD |
| Transceiver |
TI TCAN1042HG |
| Ports |
2 |
| Baud Rate |
CAN bit rates: 10 k ~ 1 M bps,
CAN FD bit rates for data field: 100 k ~ 10 M bps (*Note1) |
| Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor |
Jumper for 120 Ω terminal resistor |
| Specification |
ISO 11898-2, CAN 2.0 A/B and FD |
| Filter |
Yes |
| Power |
| Consumption |
150 mA @ 5 V |
| Mechanical |
| Dimensions (mm) |
121.7 x 21.6 x 92.7 (W x L x H) |
| Environmental |
| Operating Temperature |
0 ~ +60 °C |
| Storage Temperature |
-20 ~ +70 °C |
| Humidity |
5 ~ 85% RH, Non-condensing |
Specification Memo
Note1: The maximum CAN FD data rate can be exceeded depending on the concrete operating conditions (cable length, network topology, settings,…), but it can also not be reached.
