Trang chủ » Bo mạch I/O kết nối máy tính (PC Boards) » Card PCI/PCI Bus 32 kênh đầu vào/ra số cách ly+32 kênh đầu vào/ra số TTL (current sourcing) ICP DAS PISO-730AU CR

Card PCI/PCI Bus 32 kênh đầu vào/ra số cách ly+32 kênh đầu vào/ra số TTL (current sourcing) ICP DAS PISO-730AU CR

Universal PCI, 32-ch Isolated Digital I/O and 32-ch Digital I/O Board (Current Sourcing, PNP)

Tính năng

Card PCI/PCI Bus 32 kênh đầu vào/ra số cách ly+32 kênh đầu vào/ra số TTL (current sourcing) ICP DAS PISO-730AU CR

  • Support the +3.3/+5 V PCI bus
  • 16-channel Optically-isolated Digital Input
  • 16-channel Optically-isolated Digital Output (Source, PNP)
  • 16-channel 5 V/TTL Digital Output
  • 16-channel 5 V/TTL Digital Input
  • 3750 Vrms photo-isolation protection
  • Two Interrupt sources
  • Card ID Function(SMD Switch)
  • Digital Output status readback
Chia sẻ:
Model: PISO-730AU CR
Views: 597

Card PCI/PCI Bus 32 kênh đầu vào/ra số cách ly+32 kênh đầu vào/ra số TTL (current sourcing) ICP DAS PISO-730AU CR

The PISO-730AU universal PCI card supports 3.3 V/5 V PCI bus. PISO-730AU cards provide 32 isolated Digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level Dgital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, the DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltage spikes. Each Digital Output includes a PNP transistor and integral suppression diode for the inductive load. The open-collector Digital Output channels are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

PISO-730AU cards also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Accessories

  • Factory automation
  • Product test
  • Laboratory automation
Hardware
Card ID Yes (4-bit)
Connector Female DB37 x 1
20-pin box header x 2
Digital Input
Channels 16 (Isolated) + 16 (Non-isolated )
Type Isolated: Photocoupler (Sink and Source)
Non-isolated: 5V/TTL
TTL Input, ON Voltage Level 2.0 V Min.
TTL Input, OFF Voltage Level 0.8 V Max.
Response Speed 4 kHz (Typical) (Isolated)
1.0 MHz (Typical) (Non-isolate)
Trigger Mode Static Update
Wet Contact, ON Voltage Level 9 ~ 24 V (Min. 7 V; Max. 30 V)
Wet Contact, OFF Voltage Level 0 ~ 1 V
Isolation 3750 Vrms (Isolated)
Digital Output
Channels 16 (Isolated) + 16 (Non-isolated )
Type Isolated:Source (PNP), Open Emitter
Non-isolated: 5V/TTL
Operation Mode Static Update
Voltage Non-isolated:
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Max. Load Current 100 mA/+30 V for each channel @ 100% duty (Isolated)
Sink: 2.4 mA @ 0.8 V (Non-isolated)
Source: 0.8 mA @ 2.0 V (Non-isolated)
Response Speed 4 kHz (Typical) (Isolated)
1.2 MHz (Typical) (Non-isolate)
Isolation 3750 Vrms (Isolated)
PC Bus
Type 3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus 8-bit
Power
Consumption 640 mA @ +5 V
Mechanical
Dimensions (mm) 105.06 x 163.68 x 22 (W x L x D)
Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing
PISO-730AU     CR Universal PCI, 32-ch Isolated Digital I/O and 32-ch Digital I/O Board (Current Sourcing, PNP) (RoHS)
Includes one CA-4002 D-Sub connector
CA-2002 20-pin flat cable,20 cm x 2
CA-2010 20-pin flat cable,1 M
CA-2020 20-pin flat cable 2 M
CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))
CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))
CA-3715DM-H DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)
CA-3730DM-H DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)
CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-3750DM-H DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-4002 37-pin Male D-sub connector with plastic cover.
DB-37 Directly connect signal to D-sub 37-pin connector
DN-37 DIN Rail Mounting 37-pin Connector
DN-20 Two 20-pin header DIN-rail terminal board
DN-20/N DN-20 without DIN-Rail mount.
DB-16P 16-channel isolated D/I board
DB-16R 16-channel relay board
ADP-20/PCI 20-pin extender
Data Sheet icon_manual icon_software_indusoft
TOP HOME