Trang chủ » Bo mạch I/O kết nối máy tính (PC Boards) » Bo mạch PCI 8 kênh đầu ra Relay và 8 kênh đầu vào số cách ly ICP DAS PISO-725U CR

Bo mạch PCI 8 kênh đầu ra Relay và 8 kênh đầu vào số cách ly ICP DAS PISO-725U CR

Universal PCI, 8-ch Relay Output and 8-ch Isolated Digital Input Board

Chia sẻ:
Model: PISO-725U CR
Views: 393

Bo mạch PCI 8 kênh đầu ra Relay và 8 kênh đầu vào số cách ly ICP DAS PISO-725U CR

The PISO-725U universal PCI card supports 3.3 V/5 V PCI bus. These cards contain 8 electromechanical Relay Output channels and 8 isolated or non-isolated Digital Input channels. The DI channels can be set to either isolated or non-isolated via a hardware jumper, and each channel will generate an interrupt signal if the state is changed, which is very useful when monitoring for contact closures/openings as it is not necessary to continuously poll the inputs. The isolated DI channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, the DI channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. The Relay Output channels are used where it is necessary to control a circuit using a low-power signal, with complete electrical isolation between the control and controlled circuits, or where several circuits must be controlled by one signal. All relays are de-energized (switched off) during power-on, and support ON/OFF status read back. The PISO-725U can be used in a variety of applications, including contact closure, external voltage sensing, load sensing and I/O control, etc.

The PISO-725U also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Hardware
Connector Female DB37 x 1
Digital Input
Channels 8
Type Photocoupler (Sink)
Response Speed 4 kHz (Typical)
Trigger Mode Static Update
Wet Contact, ON Voltage Level 9 ~ 24 V
Wet Contact, OFF Voltage Level 0 ~ 1 V
Isolation 3750 Vrms (Using external power)
Relay Output
Channels 8
Type Form C
Contact Rating AC: 0.3 A/120 V
DC: 1 A/30 V
Operate Time 5 ms (Typical)
Release Time 10 ms (Typical)
PC Bus
Type 3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus 8-bit
Power
Consumption 300 mA @ +5 V
Mechanical
Dimensions (mm) 110 x 150 x 22 (W x L x D)
Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing
  • Factory automation
  • Product test
  • Laboratory automation
PISO-725U     CR Universal PCI, 8-ch Relay Output and 8-ch Isolated Digital Input Board (RoHS)
Includes one CA-4002 D-Sub connector

TOP HOME