Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module Ethernet 4/8 kênh đầu vào bộ đếm tốc độ cao/tần số/vòng quay+4 kênh đầu ra số ICP DAS PET-7284 CR

Module Ethernet 4/8 kênh đầu vào bộ đếm tốc độ cao/tần số/vòng quay+4 kênh đầu ra số ICP DAS PET-7284 CR

PoE Ethernet I/O Module with 2-port Ethernet Switch, 4/8-ch Counter/Frequency/Encoder Input and 4-ch

Chia sẻ:
Model: PET-7284 CR
Views: 439

Module Ethernet 4/8 kênh đầu vào bộ đếm tốc độ cao/tần số/vòng quay+4 kênh đầu ra số ICP DAS PET-7284 CR

The PET-7284 is a 32-bit high-speed Counter/Frequency/Encoder input and 4-channel Digital Output module that offers a variety of input mode options, including “Up Counter”, “Frequency Input”, “Up/Down Counter”, “Direct/Pulse Counter” and “A/B Phase Counter”. The mode can be individually configured for all 8 channels, where, for example, some channels can be set to “Up Counter” mode, and other channels can be individually set to “Frequency”, “Up/ Down Counter” or “Encoder input” mode. The built-in programmable low pass filter can be used to eliminate noise where the width of the high/low pulse is narrower than the minimum high/low width of the low pass filter. The PET-7284 module is equipped with FRAM memory to retain the counter values. FRAM is a type of non-volatile memory that can be used to store written data, even after the module has been powered off. This storage feature can be either enabled or disabled, and the data can be retained for up to 10 years.
Counter/Frequency/Encoder Input
Counter/Frequency/Encoder Input 4-channel Up/Down Counter (CW/CCW)
4-channel Dir/Pulse Counter (Bi-directional)
4-channel A/B Phase (Quadrant Counting)
8-channel Up Counter
8-channel Frequency
Contact Wet
Sink/Source (NPN/PNP) Sink
Types Counter, Frequency or Encoder
Counter/Encoder bits 32-bit (4,294,967,295)
On Voltage Level +3.5 VDC ~ +30 VDC
Off Voltage Level +1 VDC Max.
Programmable Low Pass Filter 1 ~ 32767 μs
Individual Channel Configuration Yes
Max. Speed 3.5 VDC ~ 10 VDC: 200 kHz
10 VDC ~ 30 VDC: 150 kHz
Frequency Accuracy 1 Hz ~ 200 kHz: ±0.025% of Input Frequency (Note1)
Count Value Retention Yes
Digital Output
Channels 4
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Max. Load Current 650 mA/channel
Load Voltage +5 VDC ~ +50 VDC
Overvoltage Protection 60 VDC
Overload Protection 1.4 A
Short-circuit Protection Yes
Power-on Value Yes, Programmable
Safe Value Yes, Programmable
Models ET-7284 PET-7284
Software
Built-In Web Server Yes
Web HMI Yes
I/O Pair Connection Yes
Communication
Ethernet Port 2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE Yes
Protocol Modbus TCP, Modbus UDP
Security ID, Password and IP Filter
Dual Watchdog Yes, Module (0.8 seconds), Communication (Programmable)
LED Indicators
for System Running Yes
for Ethernet Link/Act Yes
for DI/DO status Yes
for PoE Power Yes
2 Way Isolation
Ethernet 1500 VDC
I/O 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Power
Reverse Polarity Protection Yes
Powered from Terminal Block 12 ~ 48 VDC
Powered from PoE Yes, IEEE 802.3af, Class1
Consumption 4.2 W 4.4 W
Mechanical
Dimensions (L x W x H) 120 mm x 76 mm x 38 mm
Installation DIN-Rail or Wall mounting
Environmental
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
Frequency Range Frequency Error (typical)
1 Hz ~ 10 Hz 0.01 Hz
10 Hz ~ 10 KHz 0.5 Hz
10 KHz ~ 100 KHz 15 Hz
100 KHz ~ 200 KHz 30 Hz
PET-7284     CR PoE Ethernet I/O Module with 2-port Ethernet Switch, 4/8-ch Counter/Frequency/Encoder Input and 4-ch DO (RoHS)
TOP HOME