Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module PoE Ethernet Modbus TCP 12 kênh đầu vào số (DI) + 6 kênh đầu ra số (DO) ICP DAS PET-7050 CR

Module PoE Ethernet Modbus TCP 12 kênh đầu vào số (DI) + 6 kênh đầu ra số (DO) ICP DAS PET-7050 CR

PoE Ethernet I/O Module with 12-ch DI and 6-ch DO

Tính năng

Module PoE Ethernet Modbus TCP 12 kênh đầu vào số (DI) + 6 kênh đầu ra số (DO) ICP DAS PET-7050 CR

• Built-in Web Server
• Web HMI
• Support for both Modbus TCP and Modbus UDP Protocols
• Communication Security
• 2-port Ethernet Switch for Daisy-Chain Topology
• Dual Watchdog
• Wide Operating Temperature Range: -25 to +75°C
• I/O Pair Connection
• Built-in I/O
• DI/Counter: 12 Channels
• DO: 6 Channels

Chia sẻ:
Model: PET-7050 CR
Views: 620

Module PoE Ethernet Modbus TCP 12 kênh đầu vào số (DI) + 6 kênh đầu ra số (DO) ICP DAS PET-7050 CRThe ET-7000/ET-7200 series provides full networking capabilities, and a variety of I/O functions, together with web based Ethernet I/O monitoring and control modules, meaning that the modules can be remotely controlled using the Modbus TCP/UDP protocol via an Ethernet network. This ensures that the ET-7000/ET-7200 series provides integration with HMI, SCADA, PLC and other industrial control software systems. The PET-7050 supports IEEE 802.3af Power-Over-Ethernet (Class 1) specifications. By connecting to network devices that support the IEEE 802.3af PoE standard, power can be supplied via a copper Ethernet cable. PET-7050 provides 6 sink-type digital output channels and 12 wet contact digital input channels, each of which is able to be used as a 32-bit counter.

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
Software
Built-in Web Server Yes
CPU Module
Watchdog Timer Module, Communication (Programmable)
Isolation
2-way Isolation I/O: 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
LED Indicators
Status Run, Ethernet, PoE
Digital Input/Counter
Channels 12
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 to +50 VDC
OFF Voltage Level +4 VDC (max.)
Max. Counts 4,294,967,295 (32-bit)
Frequency 500 Hz
Min. Pulse Width 1 ms
Input Impedance 10 KΩ
Overvoltage Protection +70 VDC
Digital Output
Channels 6
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +5 to +30 VDC
Load Current 100 mA/channel at 25°C
Direct Drive Power Relay Module
Overvoltage Protection +60 VDC
Overload Protection 1.3 A
Short-circuit Protection Yes
Power on Value Programmable
Safe Value Programmable
Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
PoE Yes
Security ID, Password and IP Filter
Protocol Modbus TCP, Modbus UDP
Power
Reverse Polarity Protection Yes
Consumption 2.4 W
Powered from PoE IEEE 802.3af, Class1
Powered from Terminal Block +12 to +48 VDC
Mechanical
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Installation DIN-Rail mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
PET-7050     CR PoE Ethernet I/O Module with 12-ch DI and 6-ch DO (RoHS)
Datasheet Documents
TOP HOME