Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module PoE Ethernet Modbus TCP 8 kênh đầu vào tương tự AI + 4 kênh đầu ra số DO ICP DAS PET-7017 CR

Module PoE Ethernet Modbus TCP 8 kênh đầu vào tương tự AI + 4 kênh đầu ra số DO ICP DAS PET-7017 CR

PoE Ethernet I/O Module with 8-ch AI and 4-ch DO

Tính năng

Module PoE Ethernet Modbus TCP 8 kênh đầu vào tương tự AI + 4 kênh đầu ra số DO ICP DAS PET-7017 CR

  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • I/O Pair Connection
  • Built-in I/O
    • AI: 8 Channels with 240 Vrms Overvoltage Protection
    • DO: 4 Channels
Chia sẻ:
Model: PET-7017 CR
Views: 1369

Module PoE Ethernet Modbus TCP 8 kênh đầu vào tương tự AI + 4 kênh đầu ra số DO ICP DAS PET-7017 CR

The PET-7017 is a module with 8-channel differential analog inputs and 4-channel digital ouputs. It provides programmable input range on all analog channels (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA) and digital output can be set alarm output with Short-circuit protection and overload protection. Each analog channel is allowed to configure an individual range and has 240 Vrms high overvoltage protection. Each analog input can be programmed to accept voltage or current as input depending upon the position of corresponding jumper. The sampling rate of PET-7017 is changeable; there are fast mode and normal mode for your consideration. PET-7017 also has qualification for 4 kV ESD protection as well as 2500 VDC intra-module isolation.

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
Software
Built-in Web Server Yes
CPU Module
Watchdog Timer Module, Communication (Programmable)
Isolation
2-way Isolation I/O: 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
LED Indicators
Status Run, Ethernet, PoE
Analog Input
Channels 8 (Differential)
Type Voltage
Current
Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
±20 mA, 0 to 20 mA, 4 to 20 mA
(Jumper Selectable)
Resolution 16-bit
Accuracy Normal Mode: ±0.1%
Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 samples/second (Total)
Fast Mode: 50 samples/second (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB (min.)
Normal Mode Rejection 100 dB
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Overcurrent Protection 50 mA at 110 VDC (max.)
Individual Channel Configuration Yes
Open Wire Detection For 4 to 20 mA only
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Isolation ±400 VDC, Virtual Channel to Channel Isolation
Digital Output
Channels 4
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +5 to +50 VDC
Load Current 700 mA/channel
Overvoltage Protection +60 VDC
Overload Protection 1.4 A
Short-circuit Protection Yes
Power on Value Programmable
Safe Value Programmable
Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
PoE Yes
Security ID, Password and IP Filter
Protocol Modbus TCP, Modbus UDP
Power
Reverse Polarity Protection Yes
Consumption 3.2 W
Powered from PoE IEEE 802.3af, Class1
Powered from Terminal Block +12 to +48 VDC
Mechanical
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Installation DIN-Rail mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -30 to +80°C
Humidity 10 to 90% RH, Non-condensing
PET-7017     CR PoE Ethernet I/O Module with 8-ch AI and 4-ch DO (RoHS)
Datasheet Documents
TOP HOME