Trang chủ » Truyền thông công nghiệp » Bộ chuyển đổi 1 cổng RS-232+1 cổng RS-485 sang Ethernet (PoE) ICP DAS PDS-720 CR

Bộ chuyển đổi 1 cổng RS-232+1 cổng RS-485 sang Ethernet (PoE) ICP DAS PDS-720 CR

Programmable (1x RS-232 and 1x RS-485) Serial-to-Ethernet Device Server

Tính năng

Bộ chuyển đổi 1 cổng RS-232+1 cổng RS-485 sang Ethernet (PoE) ICP DAS PDS-720 CR

  • Incorporate Serial Devices in an Ethernet network
  • “Virtual COM” Extend COM Ports
  • VxComm Utility supports 32/64-bit Windows 7 SP1/10/2012/2016
  • Supports Modbus TCP to RTU/ASCII Gateway
  • Powerful Programmable Device Server
  • Watchdog Timer suitable for use in harsh environments
  • Serial Port +/-4 kV ESD Protection Circuit
  • Self-Tuner ASIC Controller on the RS-485 Port
  • Built-in High Performance MiniOS7 from ICP DAS
  • Palm-Sized with multiple Serial Ports
Chia sẻ:
Model: PDS-720 CR
Views: 2621

Bộ chuyển đổi 1 cổng RS-232+1 cổng RS-485 sang Ethernet (PoE) ICP DAS PDS-720 CR

The PDS-700 series is a family of Programmable Device Servers, also known as “Serial-to-Ethernet gateway”, that are designed for linking RS-232/422/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-700 series into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-700 series is able to meet the demands of every network-enabled application.

The PDS-700 series includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-700 up in just one second and gives you fastest response. It also works as a Modbus TCP to RTU/ASCII gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.

The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE.

The PDS-720(D) and PPDS-720(D)-MTCP is equipped with 1 RS-232 port and 1 RS-485 port. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.

  • Factory Automation
  • Building Automation
  • Home Automation
CPU Module
CPU 80186-80 MHz or compatible
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles
Flash 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles
SRAM 512 KB
Watchdog Timer Yes
LED Indicators
Status 1 x Power
COM Ports
Ports 1 x 5-wire RS-232
1 x RS-485
Baud Rate 115200 bps Max.
Bias Resistor Yes, 1 KΩ
Parity None, Even, Odd, Mark, Space
None parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM2
Stop Bit 1, 2: for COM1 ~ COM2
Node Address 254 (max.)
Ethernet
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Power
Consumption 2.0 W
Powered from Terminal Block +10 ~ 30 VDC
Mechanical
Casing Plastic
Dimensions (mm) 72 mm x 35 mm x 112 mm (W x L x H)
Installation DIN-Rail or Wall mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, non-condensing
PDS-720     CR Programmable (1x RS-232 and 1x RS-485) Serial-to-Ethernet Device Server (RoHS)
Includes CA-0910 Cable
Datasheet Documents
TOP HOME