Trang chủ » Bo mạch I/O kết nối máy tính (PC Boards) » Card PCI 16 kênh đầu vào số+16 kênh đầu ra PhotoMOS Relay ICP DAS PCI-P16POR16U CR

Card PCI 16 kênh đầu vào số+16 kênh đầu ra PhotoMOS Relay ICP DAS PCI-P16POR16U CR

Universal PCI, 16-ch Optically Isolated Digital Input and 16-ch PhotoMOS Relay Output Board

Chia sẻ:
Model: PCI-P16POR16U CR
Views: 535

Card PCI 16 kênh đầu vào số+16 kênh đầu ra PhotoMOS Relay ICP DAS PCI-P16POR16U CR

The PCI-P16POR16U Universal PCI card supports both 5 V and 3.3 V. These cards provide 8 or 16 optically isolated input channels and 16 PhotoMOS Relay output channels. Both the isolated DI channels and the PhotoMOS Relay channels use a short optical transmission path to transfer an electronic signal between elements of a circuit and keep them electrically isolated. The PCI-P16POR16U card provides 5000 Vrms for DI channel isolation protection, allowing the input signals to be completely floated so as to cut down ground loops, block voltage spikes, and isolate the host computer from damaging voltages. PhotoMOS Relays are used where it is necessary to control a circuit using a low-power signal (with complete electrical isolation between the control and controlled circuits), or where several circuits must be controlled by one signal. These cards can be used in various applications, such as controlling the ON/OFF state of external devices, driving external relays or small power switches, activating alarms, contact closure, sensing external voltages or switches, etc.

The PCI-P16POR16U card also adds a Card ID switch on-board. Users can set Card ID and then recognizes the board by the ID via software when using two or more cards in one computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Accessories

  • DOS Lib and TC/BC/MSC sample program (with source codes)
  • DLL and OCX SDK for Windows 95/98/NT/2K.
  • DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
  • VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
  • LabVIEW toolkit for Windows.
  • Driver for Linux.
Hardware
Card ID Yes (4-bit)
Connector Female DB37 x 1
40-pin box header x 1
Digital Input
Channels 16
Type Photocoupler (Sink and Source)
Response Speed Without Filter: 50 kHz (Typical)
With Filter: 0.455 kHz(Typical)
Trigger Mode Static Update
Wet Contact, ON Voltage Level AC/DC 5 ~ 24 V (AC 50 ~ 1 kHz)
Wet Contact, OFF Voltage Level AC/DC 0 ~ 1 V
Isolation 2000 VDC
Relay Output
Channels 16
Type PhotoMos Relay (Form A)
Contact Rating Load Voltage: 300 V (AC peak or DC)
Load Current: 130 mA
Operate Time 0.7 ms (typical)
Release Time 0.05 ms (typical)
Electrical Endurance Long Life and No Sparking
PC Bus
Type PCI-Express x 1
Data Bus 16-bit
Power
Consumption 600 mA @ +3.3 V
300 mA @ +12 V
Mechanical
Dimensions (mm) 113 x 118 x 22 (W x L x D)
Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Humidity 5 ~ 85% RH, Non-condensing
PCI-P16POR16U     CR Universal PCI, 16-ch Optically Isolated Digital Input and 16-ch PhotoMOS Relay Output Board (RoHS)
Includes one CA-4037W cable and two CA-4002 D-Sub connectors.
CA-3710 DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°))
CA-3710D DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°))
CA-3715DM-H DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS)
CA-3730DM-H DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS)
CA-3750DM DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-3750DM-H DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS)
CA-4002 37-pin Male D-sub connector with plastic cover.
CA-4037W 40-pin flat & D-sub 37-pin Female cable 24 cm.
DB-37 Directly connect signal to D-sub 37-pin connector
DN-37 DIN Rail Mounting 37-pin Connector
TOP HOME