Trang chủ » Truyền thông công nghiệp » Switch công nghiệp 4 cổng PoE Ethernet 1 cổng quang (Multi mode, ST) ICP DAS NSM-205PFT CR

Switch công nghiệp 4 cổng PoE Ethernet 1 cổng quang (Multi mode, ST) ICP DAS NSM-205PFT CR

4-port 10/100 Mbps PoE (PSE) with 1 fiber port Switch (Multi mode, ST connector); metal case

Tính năng

Switch công nghiệp 4 cổng PoE Ethernet 1 cổng quang (Multi mode, ST) ICP DAS NSM-205PFT CR

• Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 4 PoE ports with Power Sourcing Equipment (PSE) operation
• Automatic MDI/MDI-X crossover for plug-and-play
• Auto-detection of PD (powered devices) and automatic power management
• Over-temperature, over-current and over/under-voltage detection
• Supports operating temperatures from -30 ~ +75 °C
• Multi-mode, ST Connector Fiber supports
• DIN-Rail Mounting

Chia sẻ:
Model: NSM-205PFT CR
Views: 352

Switch công nghiệp 4 cổng PoE Ethernet 1 cổng quang (Multi mode, ST) ICP DAS NSM-205PFT CR

The NSM-205PFT is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NSM-205PFT makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions.
EMS Protection
ESD (IEC 61000-4-2) ± 4 kV Contact
LED Indicators
Status Power, Link/Act, Power Device is detected
Ethernet
Ports 4 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Isolation 1500 Vrms 1 minute
PoE Technology
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Operation Automatic detection and power management
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Disconnect Mode DC disconnect
PoE Voltage +48 VDC depending on power input
Fiber
Ports 1 x 100 Base-FX, ST connector
Mode Multi-Mode
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output -20 dBm Min.
-14 dBm Max.
RX Sensitivity -32 dBm
RX Overload -8 dBm
Budget 12 dBm
Power
Reverse Polarity Protection Yes
Input Range +46 ~ +55 VDC for PoE output
Consumption 0.08 A @ 48 VDC without PD loading;
1.5 A @ 48 VDC with PD full loading
Mechanical
Casing Metal
Dimensions (mm) 25 x 168 x 133 (W x L x H)
Installation DIN-Rail Mounting
Ingress Protection Rating IP30
Environmental
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
NSM-205PFT     CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
Data Sheet
TOP HOME