Trang chủ » Truyền thông công nghiệp » Ethernet Communication » Switch công nghiệp 4 cổng Gigabit PoE Ethernet + 1 cổng combo Gigabit SFP ICP DAS NSM-205GP CR

Switch công nghiệp 4 cổng Gigabit PoE Ethernet + 1 cổng combo Gigabit SFP ICP DAS NSM-205GP CR

4G+1G Combo Port Gigabit Unmanaged Ethernet Switch with 4 IEEE 802.3af/at PoE+ ports (RoHS)

Chia sẻ:
Model: NSM-205GP CR
Views: 421

Switch công nghiệp 4 cổng Gigabit PoE Ethernet + 1 cổng combo Gigabit SFP ICP DAS NSM-205GP CR

The NSM-205GP is 5-port unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-205GP switch enable centralization of the power supply, providing up to 30 watts. The NSM-205GP can be used to power IEEE 802.3af/at standard devices (PD).

Voltage boost technology supports 24V industrial power sources ensuring that a full and proper PSE voltage is available across all PoE ports.

LED Indicators
Status PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected
Ethernet
Ports 4 x RJ-45, 10/100/1000Base-T
1 x RJ45 /SFP Slot Combo, 10/100/1000Base-T
Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
IEEE 802.3af Power Over Ethernet
IEEE 802.3at Power Over Ethernet
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity
Processing Type Store & forward, wire speed switching
MAC Table 8 K
Memory Bandwidth 10 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE802.3x flow control, back pressure flow control
Jumbo Frames 10 K for Speed 1000M
Isolation 1500 Vrms 1 minute
DIP Switch 100BaseSFP/1000BaseSFP and PoE/PoE+ setting
PoE Technology
PoE Compliance 100% IEEE 802.3at compliant
PoE Power Up to 30 watts per channel
PoE Operation Automatic detection and power management
PoE Pin Assignments V+ (pin 1, 2), V-(pin 3, 6)
PoE Disconnect Mode DC disconnect
Fiber
Ports 1 x 1000Base /100Base SFP slot
Power
Reverse Polarity Protection Yes
Input Range +18 ~ +55 VDC Redundant Dual Inputs
Redundant Power Inputs Yes
Consumption 0.13@ 48 VDC without PD loading; 3.1 A @ 48 VDC with PD full loading (30 W per ports)
0.25@ 24 VDC without PD loading; 6.2 A @ 24 VDC with PD full loading (30 W per ports)
Alarm Output Yes,Relay 1 A @ 30 VDC
Mechanical
Casing Metal
Dimensions (mm) DIN-rail mounting: 28 x 160 x 121 (W x L x H)
Wall mounting: 28 x 199 x 114 (W x L x H)
Installation DIN-rail mounting or wall mounting (optional)
Ingress Protection Rating IP30
Environment
Operating Temperature -40 °C ~ + 75 °C
Storage Temperature -40 °C ~ + 85 °C
Humidity 10% ~ 90% RH, non-condensing
NSM-205GP     CR  4G+1G Combo Port Gigabit Unmanaged Ethernet Switch with 4 IEEE 802.3af/at PoE+ ports (RoHS)
TOP HOME