Trang chủ » Truyền thông công nghiệp » Ethernet Communication » Switch công nghiệp PoE 4 cổng 10/100 Mbps (PSE) với 1 cổng quang Multi mode, SC ICP DAS NS-205PFC-24V CR

Switch công nghiệp PoE 4 cổng 10/100 Mbps (PSE) với 1 cổng quang Multi mode, SC ICP DAS NS-205PFC-24V CR

4-port 10/100 Mbps PoE (PSE) with 1 fiber port (Multi mode, SC connector) and +24 VDC Input

Tính năng

Switch công nghiệp PoE 4 cổng 10/100 Mbps (PSE) với 1 cổng quang Multi mode, SC ICP DAS NS-205PFC-24V CR

• Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 4 PoE ports with Power Sourcing Equipment (PSE) operation
• Automatic MDI/MDI-X crossover for plug-and-play
• Auto-detection of PD (powered devices) and automatic power management
• Over-temperature, over-current and over/under-voltage detection
• Supports operating temperatures from -30 ~ +75 °C
• Multi-mode, SC Connector Fiber supports
• DIN-Rail Mounting

Chia sẻ:
Model: NS-205PFC-24V CR
Views: 397

Switch công nghiệp PoE 4 cổng 10/100 Mbps (PSE) với 1 cổng quang Multi mode, SC ICP DAS NS-205PFC-24V CR

The NS-205PFC-24V is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PFC-24V makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NS-205PFC-24V is designed with 24 VDC to 48 VDC boost for PoE application where 48 VDC power supply is not available.
Models NS-205PF-24V NSM-205PF-24V NS-205PF NSM-205PF
PoE 802.3af
Input Voltage Rangeg +18 ~ 32 VDC +46 ~ +55 VDC
Operating Temperature -30 °C ~ +75 °C
Casing Plastic Metal (IP30) Plastic Metal (IP30)
Installation DIN-Rail Mounting
Dimensions (W x H x D)
(Unit: mm)		 31 x 157 x 113 25 x 168 x 119 31 x 157 x 113 25 x 168 x 119
Models NS-205PF Series NSM-205PF Series NS-205PF-24V Series NSM-205PF-24V Series
Technology
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act, Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
+/-4 kV ESD Protection Yes
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode NS-205PFT/FC
NSM-205PFT/FC
NS-205PFT-24V/FC-24V
NSM-205PFT-24V/FC-24V		 Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm
Single-Mode NS-205PFCS
NSM-205PFCS
NS-205PFCS-24V/FCS-24V
NSM-205PFCS-24V/FCS-24V		 Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 30 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Min. RX Overload: -5 dBm
Budget: 19 dBm
Single-Mode NS-205PFCS-60
NSM-205PFCS-60
NS-205PFCS-60-24V/FCS-60-24V
NSM-205PFCS-60-24V/FCS-60-24V		 Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 60 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Min. RX Overload: -5 dBm
Budget: 30 dBm
Power Input
Input Voltage Range +46 ~ +55 VDC for PoE output +18 ~ +32 VDC
Power Consumption 0.08 A @ 48 VDC without PD loading;
1.5 A @ 48 VDC with PD full loading		 0.24 A @ 24 VDC without PD loading;
3.2 A @ 24 VDC with PD full loading;
4.6 A @ 18 VDC with PD full loading
Protection Power reverse polarity protection
+/-4 kV ESD Protection Yes
Connector 3-Pin Removable Terminal Block
PoE Technology
PoE Compliance 100% IEEE 802.3af compliant
PoE Classification PSE (Power Sourcing Equipment)
PoE Voltage +48 VDC depending on power input
PoE Voltage Up to 15.4 watts per channel
PoE Operation Automatic detection and power management
PoE Pin assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE disconnect mode DC disconnect
Mechanical
Casing Plastic
(Flammability UL 94V-0)		 Metal (IP30 Protection) Plastic
(Flammability UL 94V-0)		 Metal (IP30 Protection)
Dimensions (W x L x H) (Unit: mm) 31 x 157 x 113 25 x 168 x 119 31 x 157 x 113 25 x 168 x 119
Installation DIN-Rail Mounting
Environment
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
Communication
Interface RS-485
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
Protocol DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator 1 LED as Power/Communication Indicator
I/O LED Indicator –
Isolation
Intra-module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each Terminal
8 kV Air for Random Point
Power
Power Consumption 1.3 W
Mechanical
Dimensions (W x L x H) I-87018ZW 30 mm x 85 mm x 114 mm
DB-1820 22 mm x 78 mm x 65 mm
DN-1822 27 mm x 96 mm x 103 mm
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
DB-1820
Wire strip length 4 ~ 5 mm
Wire Range 16 ~ 24 AWG
NS-205PFC-24V     CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
DR-120-24 24V/5 A, 120 W Single Output Industrial DIN Rail Power Supply
MDR-60-24 24V/2.5A, 60 W Power Supply with DIN-Rail Mounting
MDR-60-48 48 V/1.25 A, 60 W Power Supply with DIN-Rail Mounting
DIN-KA52F-48 48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting
KA52F-48 48 V/0.52 A, 25 W Power Supply
icon_software
TOP HOME