Trang chủ » Truyền thông công nghiệp » Ethernet Communication » Switch công nghiệp ST/SC Connector PoE 4 cổng 10/100 Mbps (PSE) với 1 cổng quang ICP DAS NS-205PF/NS-205PF-24V

Switch công nghiệp ST/SC Connector PoE 4 cổng 10/100 Mbps (PSE) với 1 cổng quang ICP DAS NS-205PF/NS-205PF-24V

4-port 10/100 Mbps PoE (PSE) with 1 fiber port Switch

4-port 10/100 Mbps PoE (PSE) with 1 fiber port and +24 VDC Input

Tính năng

Switch công nghiệp ST/SC Connector PoE 4 cổng 10/100 Mbps (PSE) với 1 cổng quang ICP DAS NS-205PF/NS-205PF-24V

  • Cung cấp cổng sợi 1 x 100-FX cộng với 4 cổng Ethernet
  • Mỗi cổng hỗ trợ cả đàm phán tự động tốc độ 10/100 Mbps
  • Kiến trúc lưu trữ và chuyển tiếp
  • Điều khiển lưu lượng áp suất song công hoàn toàn theo chuẩn IEEE 802.3x và một nửa
  • 4 cổng PoE với hoạt động Thiết bị tìm nguồn điện (PSE)
  • Crossover MDI / MDI-X tự động cho plug-and-play
  • Tự động phát hiện PD (thiết bị hỗ trợ) và quản lý năng lượng tự động
  • Phát hiện quá nhiệt, quá dòng và quá / dưới điện áp
  • Hỗ trợ nhiệt độ hoạt động từ -30 ~ +75 ° C
  • Lắp đặt DIN-Rail
Chia sẻ:
Model: NS-205PF/NS-205PF-24V
Views: 351

Switch công nghiệp ST/SC Connector PoE 4 cổng 10/100 Mbps (PSE) với 1 cổng quang ICP DAS NS-205PF/NS-205PF-24V

NS-205PF / NSM-205PF là PoE (PSE) 4 cổng không được quản lý với 1 cổng chuyển đổi sợi quang; nó hỗ trợ 4 cổng PoE được phân loại là thiết bị nguồn điện (PSE). NS-205PF / NSM-205PF làm cho việc cung cấp năng lượng tập trung trở thành sự thật và cung cấp công suất lên tới 15,4 watt cho mỗi cổng PSE. Sử dụng sợi quang, bạn có thể ngăn tiếng ồn can thiệp vào hệ thống của mình và hỗ trợ truyền tốc độ cao (100 Mbps) và tốc độ cao (lên đến 60 km).

Sê-ri NS-205PF-24V / NSM-205PF-24V được thiết kế với mức tăng 24 VDC đến 48 VDC cho ứng dụng PoE nơi không có nguồn điện 48 VDC.

 

Models NS-205PF-24V NSM-205PF-24V NS-205PF NSM-205PF
PoE 802.3af
Input Voltage Rangeg +18 ~ 32 VDC +46 ~ +55 VDC
Operating Temperature -30 °C ~ +75 °C
Casing Plastic Metal (IP30) Plastic Metal (IP30)
Installation DIN-Rail Mounting
Dimensions (W x H x D)
(Unit: mm)		 31 x 157 x 113 25 x 168 x 119 31 x 157 x 113 25 x 168 x 119
Models NS-205PF Series NSM-205PF Series NS-205PF-24V Series NSM-205PF-24V Series
Technology
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Ethernet Interface
RJ-45 Ports 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators Power, Link/Act, Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
+/-4 kV ESD Protection Yes
Fiber Interface (100 Base-FX; SC/ST type)
Multi-Mode NS-205PFT/FC
NSM-205PFT/FC
NS-205PFT-24V/FC-24V
NSM-205PFT-24V/FC-24V		 Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm
Single-Mode NS-205PFCS
NSM-205PFCS
NS-205PFCS-24V/FCS-24V
NSM-205PFCS-24V/FCS-24V		 Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 30 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Min. RX Overload: -5 dBm
Budget: 19 dBm
Single-Mode NS-205PFCS-60
NSM-205PFCS-60
NS-205PFCS-60-24V/FCS-60-24V
NSM-205PFCS-60-24V/FCS-60-24V		 Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 60 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Min. RX Overload: -5 dBm
Budget: 30 dBm
Power Input
Input Voltage Range +46 ~ +55 VDC for PoE output +18 ~ +32 VDC
Power Consumption 0.08 A @ 48 VDC without PD loading;
1.5 A @ 48 VDC with PD full loading		 0.24 A @ 24 VDC without PD loading;
3.2 A @ 24 VDC with PD full loading;
4.6 A @ 18 VDC with PD full loading
Protection Power reverse polarity protection
+/-4 kV ESD Protection Yes
Connector 3-Pin Removable Terminal Block
PoE Technology
PoE Compliance 100% IEEE 802.3af compliant
PoE Classification PSE (Power Sourcing Equipment)
PoE Voltage +48 VDC depending on power input
PoE Voltage Up to 15.4 watts per channel
PoE Operation Automatic detection and power management
PoE Pin assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE disconnect mode DC disconnect
Mechanical
Casing Plastic
(Flammability UL 94V-0)		 Metal (IP30 Protection) Plastic
(Flammability UL 94V-0)		 Metal (IP30 Protection)
Dimensions (W x L x H) (Unit: mm) 31 x 157 x 113 25 x 168 x 119 31 x 157 x 113 25 x 168 x 119
Installation DIN-Rail Mounting
Environment
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
Communication
Interface RS-485
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
Protocol DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator 1 LED as Power/Communication Indicator
I/O LED Indicator –
Isolation
Intra-module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each Terminal
8 kV Air for Random Point
Power
Power Consumption 1.3 W
Mechanical
Dimensions (W x L x H) I-87018ZW 30 mm x 85 mm x 114 mm
DB-1820 22 mm x 78 mm x 65 mm
DN-1822 27 mm x 96 mm x 103 mm
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
DB-1820
Wire strip length 4 ~ 5 mm
Wire Range 16 ~ 24 AWG
NS-205PFT CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS)
NS-205PFC CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS)
NS-205PFCS CR Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS)
NS-205PFCS-60 CR Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch (RoHS)
NSM-205PFT CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
NSM-205PFC CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
NSM-205PFCS CR Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
NSM-205PFCS-60 CR Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port Switch; metal case (RoHS)
NS-205PFT-24V CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
NS-205PFC-24V CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
NS-205PFCS-24V CR Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
NS-205PFCS-60-24V CR Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch (RoHS)
NSM-205PFT-24V CR Multi-mode, ST Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)
NSM-205PFC-24V CR Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)
NSM-205PFCS-24V CR Single-mode 30 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)
NSM-205PFCS-60-24V CR Single-mode 60 km, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)
DR-120-24 24V/5 A, 120 W Single Output Industrial DIN Rail Power Supply
MDR-60-24 24V/2.5A, 60 W Power Supply with DIN-Rail Mounting
MDR-60-48 48 V/1.25 A, 60 W Power Supply with DIN-Rail Mounting
DIN-KA52F-48 48 V/0.52 A, 25 W Power Supply with DIN-Rail Mounting
KA52F-48 48 V/0.52 A, 25 W Power Supply
icon_software
TOP HOME