Trang chủ » Truyền thông công nghiệp » Switch công nghiệp 4 cổng Ethernet 1 cổng quang (Multi mode, ST) ICP DAS NS-205FT CR

Switch công nghiệp 4 cổng Ethernet 1 cổng quang (Multi mode, ST) ICP DAS NS-205FT CR

4-port 10/100 Mbps Ethernet with 1 fiber port Switch (Multi mode, ST connector)

Chia sẻ:
Model: NS-205FT CR
Views: 401

Switch công nghiệp 4 cổng Ethernet 1 cổng quang (Multi mode, ST) ICP DAS NS-205FT CR

The NS-205FT is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NS-205FT provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
LED Indicators
Status Power, Link/Act, 10/100M, Full duplex/Half duplex (Fiber Port)
Ethernet
Ports 4 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Addresses 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Isolation 1500 Vrms 1 minute
Fiber
Ports 1 x 100 Base-FX, ST connector
Mode Multi-Mode
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output -20 dBm Min.
-14 dBm Max.
RX Sensitivity -34 dBm
Power
Input Range +10 ~ +30 VDC
Consumption 0.14 A @ 24 VDC
Mechanical
Casing Plastic
Dimensions (mm) 64 x 118 x 101 (W x L x H)
Installation DIN-Rail Mounting
Environmental
Operating Temperature 0 °C ~ +70 °C
Storage Temperature -20 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
NS-205FT     CR Multi-mode, ST Connector, 4-port 10/100 Mbps with 1 fiber port Switch (RoHS)
TOP HOME