Trang chủ » Truyền thông công nghiệp » Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet sang 1 cổng quang Multi mode, ST ICP DAS NS-200FT CR

Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet sang 1 cổng quang Multi mode, ST ICP DAS NS-200FT CR

Industrial 10/100 Base-T to 100 Base-FX Media Converter (Multi mode, ST connector)

features

Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet sang 1 cổng quang Multi mode, ST ICP DAS NS-200FT CR

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• Supports +10 ~ +30 VDC voltage
• Supports operating temperatures from 0 °C ~ +70 °C
• Multi-mode, ST Connector Fiber supports
• DIN-Rail mount for industrial usage

Chia sẻ:
Model: NS-200FT CR
Views: 918

Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet sang 1 cổng quang Multi mode, ST ICP DAS NS-200FT CR

The NS-200FT is an Ethernet (10/100Base-TX) to Fiber Optic (100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function. The NS-200FT operates at either half or full duplex mode. It contains “soft start” function with overload protection, high-low voltage protection. The width of the NS-200FT is just 32.30 mm, so it can be used where space is important.
Technology
Standards IEEE802.3, 802.3u, 802.3x
Processing Type Store & forward wire speed switching
MAC Addresses 1024
Memory Bandwidth 1.4 Gbps
Interface
RJ-45 Ports 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection
Fiber Port 100 Base-FX
LED Indicators 10/100M, Link/Act, Full duplex/Half duplex(Fiber Port)
Ethernet Isolation 1500 Vrms 1 minute
Multi Mode Multi mode fiber cables:50/125, 62.5/125 or 100/140 μm
Distance :2 km, (62.5/125 μ mrecommended) for full duplex
Wavelength : 1300 or 1310nm
Min. TX Output:- 20 dBm
Max. TX Output: -14 dBm
RX Sensitivity: -34 to -31 dBm
Single Mode Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Distance: 15 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: – 15 dBm
Max. TX Output: -8 dBm
RX Sensitivity: -36 to -31 dBm
Ethernet Transmission distance Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
Power
Input Voltage Range +10 ~ +30 VDC (Non-isolation)
Power Consumption 0.12 A@24 VDC, +/- 5% arrowed with 100M Full duplex
LED Indicator Yes
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Mechanical
Casing Plastic (Flammability UL 94V-0)
Dimensions (W x L x H) 33 mm x 85 mm x 107 mm
Installation DIN-Rail
Environment
Operating Temperature 0 °C ~ +70 °C
Storage Temperature -20 °C ~ +85 °C
Ambient Relative Humidity 10% ~ 90% RH, non-condensing
NS-200FT     CR Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 multi mode, ST connector (RoHS)
Data Sheet icon_manual icon_internal
TOP HOME