Industrial 10/100 Base-TX to 100 Base-FX Media Converter (Multi mode, ST connector)
Tính năng
Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet sang 1 cổng quang Multi mode, ST ICP DAS NS-200AFT-T CR
• Automatic MDI/MDI-X crossover for plug-and-play
• Supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 1.4 Gbps high performance memory bandwidth
• Frame buffer memory: 256 Kbit
• 1024 MAC addresses
• Supports +12 VDC ~ +48 VDC
• Reverse Polarity Protection
• Supports operating temperatures from -30 °C ~ +75 °C
• Multi-mode, ST Connector Fiber supports
• Slim packaging fits on your DIN-Rail
Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet sang 1 cổng quang Multi mode, ST ICP DAS NS-200AFT-T CR
| Models | NS-200AFC-T | NS-200AFT-T | NS-200AFCS-T | NS-200AFCS-60T | |
| Technology | |||||
| Standards | IEEE 802.3, 802.3u, 802.3x | ||||
| Processing Type | Store & forward, wire speed switching | ||||
| MAC Addresses | 1024 | ||||
| Memory Bandwidth | 1.4 Gbps | ||||
| Frame Buffer Memory | 256 Kbit | ||||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | ||||
| Interface | |||||
| RJ-45 Ports | 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | ||||
| Fiber Port | 100 Base-FX | ||||
| LED Indicators | 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port) | ||||
| Ethernet Isolation | 1500 Vrms 1 minute | ||||
| Multi Mode | Multi mode fiber cables | 50/125, 62.5/125 or 100/140 μm | – | ||
| Distance | 2 km, (62.5/125 μm recommended) for full duplex | – | |||
| Wavelength | 1300 or 1310nm | – | |||
| Min. TX Output | – 20 dBm | – | |||
| Max. TX Output | -14 dBm | – | |||
| Max. RX Sensitiv | -32 dBm | – | |||
| Max. RX Overload | -8 dBm | – | |||
| Budget | 12 dBm | – | |||
| Single Mode | Single-mode fiber cables | – | 8.3/125, 8.7/125, 9/125 or 10/125μm | ||
| Distance | – | 30 Km | 60 Km | ||
| Wavelength | – | 1300 or 1310nm | |||
| Min. TX Output | – | – 15 dBm | -5 dBm | ||
| Max. TX Output | – | -8 dBm | 0 dBm | ||
| Max. RX Sensitivity | – | -34 dBm | -35 dBm | ||
| Max. RX Overload | – | -5 dBm | |||
| Budget | – | 19 dBm | 30 dBm | ||
| Ethernet Transmission Distance | Ethernet | 2-pair UTP/STP Cat.3, 4, 5, EIA/TIA-568 100 Ω | |||
| Fast Ethernet | 2-pair UTP/STP Cat. 5, EIA/TIA-568 100 Ω | ||||
| Power | |||||
| Input Voltage Range | +12 VDC ~ +48 VDC (Non-isolation) | ||||
| Power Consumption | 0.12 A @ 24 VDC | ||||
| LED Indicator | Yes | ||||
| Protection | Power reverse polarity protection | ||||
| Frame Ground for EMS Protection | Yes | ||||
| Mechanical | |||||
| Casing | Plastic (Flammability UL 94V-0) | ||||
| Dimensions (W x L x H) | 33 mm x 85 mm x 107 mm | ||||
| Installation | DIN-Rail | ||||
| Environment | |||||
| Operating Temperature | -30 °C ~ +75 °C | ||||
| Storage Temperature | -30 °C ~ +85 °C | ||||
| Ambient Relative Humidity | 10% ~ 90% RH, non-condensing | ||||
| NS-200AFT-T CR | Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 multi mode, ST connector (RoHS) |
