New Product Release: LC-223H

Trang chủ » Sản phẩm mới » New Product Release: LC-223H
16/03/2020 Sản phẩm mới 2939 viewed

1-channel Dimmer Control with High Power Relay Output and 2-channel Dry Contact Input Module

 

Introduction:
The LC-223H is an easy-to-use dimming ballast control module that can be easily installed and operated without requiring specialist knowledge or skills. The brightness of a fluorescent lamp can be controlled by using a dimmer, either via digital input or a host controller. The light value of the luminous flux can be controlled via digital input in sequence from 10% to 100% without a remote host controller. 4 kV ESD, 2kV SURGE protection and 2500 VDC intra-module isolation are also provided. Communication with the LC-223H is programmable based on the Modbus RTU/DCON protocol, with the added benefit that different addresses can be set via hardware configuration.

Features:
  • Provide High Power Relay Output to Turn ON/OFF the Dimming Ballast
  • Provide the Wall Switch Function to Control the Brightness of the Dimming Ballast When the Host Fail Communication
  • Isolated Analog Output (0 to 20 mA, 0 to 10 V, 1 to 10 V) For Dimming Control
  • Provide The Dry Contact to Trigger the Brightness of the Dimming Ballast
  • Relay Operation Current: 16 A (Res. Load) @ 250 VAC Recommend Working Current: 1.5 A
  • Support Lighting Module (Max.):
    ○ T8 Fluorescent Lamp: 40W/ 220VAC * 8 Sets
    ○ LED Lamp: 40W/ 220VAC * 10 Sets
  • Supports Modbus RTU and DCON Protocols
  • 2500 VDC Intra-Module Isolation
  • ±2 kV SURGE,±4 kV ESD and EFT Protection
  • DIN-Rail Mounting

 

 

The comparison table of LC-223 and LC-223H is shown below:

LC-223
LC-223H
Max. Load Current 16 A (Resistive Load, recommend working current is 0.8 A with 220VAC) 16 A (Resistive Load, recommend working current is 1.5 A with 220VAC)
Max. Inrush Current 80A / 100us 165A / 20ms or 492A / 1.5ms
Max. Lighting Loads T8 Fluorescent Lamp: (40W / 220VAC) * 4 Sets (1) T8 Fluorescent Lamp: (40W / 220VAC) * 8 Sets
(2) LED Lamp: (40W / 220VAC) *10 Sets
EMS Protection ±4 kV ESD and EFT Protection ±2 kV Surge Protection, ±4 kV ESD and EFT Protection
Connector RJ-11 (6P4C or 6P6C) PCB Terminal Blocks (5.0mm), Push in design
Dimensions (W x L x H) 52 mm x 98 mm x 27 mm 72 mm x 100 mm x 59 mm

Ordering Information:

LC-223H CR 1-channel Dimmer Control with High Power Relay Output and 2-channel Dry Contact Input Module (RoHS)

 

For more information, please refer to:
http://www.icpdas.com/root/product/solutions/remote_io/rs-485/lighting_control/lc-223h.html
Chia sẻ:
Tags:
TOP HOME