Trang chủ » Truyền thông công nghiệp » Ethernet Communication » Switch công nghiệp quản lý Layer-2 8 cổng Ethernet ICP DAS MSM-508 CR

Switch công nghiệp quản lý Layer-2 8 cổng Ethernet ICP DAS MSM-508 CR

8-port Industrial Ethernet Layer 2 Managed Switch

Chia sẻ:
Model: MSM-508 CR
Views: 1504

Switch công nghiệp quản lý Layer-2 8 cổng Ethernet ICP DAS MSM-508 CR

The MSM-508 is an 8-port Industrial Ethernet (10/100 Base-TX) Layer 2 Managed Switch. MSM-508 supports 10/100M auto negotiation feature and auto MDI/MDI-X function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.

It can be managed through RS-232 port via serial console or Ethernet port using telnet or Web browser. In addition, the switch supports a lot of powerful managed functions, such as 802.1Q Tag-based VLAN, Portbased VLAN, 802.1p QoS (Quality of Service), Port Trunking, Spanning Tree, Cable Testing and Port Mirroring. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically the switch detects and recovers from a copper link failure within approximately 20 ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet port with Modbus or OPC protocol.

MSM-508 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the it’s power needs. And the relay output facility can deliver warning signal while power or network link failure.

LED Indicators
Status Power, 10/100M, Link/Act, Master
Ethernet
Ports 8 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET
Redundant Strategy STP, Ring (ICP DAS)
Isolation 1500 Vrms 1 minute
DIP Switch Yes, Normal Run / Repair Mode
Digital Input
Channels 3
Type Wet Contact
ON Voltage Level +19 VDC ~ +30 VDC
OFF Voltage Level +11 VDC Max.
Digital Output
Channels 3
Type Open Collector
Sink/Source (NPN/PNP) Sink (NPN)
Load Current 30V/100 mA Max.
COM Ports
Ports 1 x RS-232 (Console)
1 x RS-485
Power
Reverse Polarity Protection Yes
Input Range +12 ~ +48 VDC Redundant Dual Inputs (Non-isolated)
Redundant Power Inputs Yes
Consumption 0.25 A @ 24 VDC
Alarm Output Yes,Relay 2 A @ 30 VDC
Mechanical
Casing Metal
Dimensions (mm) DIN-rail mounting: 47 x 175 x 129 (W x L x H)
Wall mounting: 51 x 190 x 129 (W x L x H)
Installation DIN-rail mounting or wall mounting
Ingress Protection Rating IP30
Environment
Operating Temperature -40 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10 ~ 90% RH, non-condensing
MSM-508     CR  8-port Layer 2 Managed Switch with metal casing (RoHS)
Includes CA-090510 Console Cable and 4SIX1K0000003 Wall mount
TOP HOME