Link youtube Link facebook
Trang chủ » Module phân tán chuyển động 32 kênh DI cách ly ICP DAS MN-D640-DIN CR

Module phân tán chuyển động 32 kênh DI cách ly ICP DAS MN-D640-DIN CR

Distributed Motionnet 32-ch Isolated DI Module

Model: MN-D640-DIN CR

Views: 72
Đánh giá bài viết
Chia sẻ:

Introduction

Module phân tán chuyển động 32 kênh DI cách ly ICP DAS MN-D640-DIN CR

The MN-D640-DIN is an I/O expansion device for Motionnet systems, and is equipped with 32 isolated digital input channels. EachMotionnet communication line can be connected to up to 64 modules, meaning that the I/O can be expanded to up to 2048 input channels. The communication time required by each MN-D640-DIN is 15.1 us. If 64 modules have been connected, signals for 2048 points on 64 modules can be sent and received within 0.97 msec. The update of the I/O status is completed automatically through the Motionnet system at a constant interval, and setting interrupts for specific input points that the customer wants to monitor can help prevent CPU time from being wasted by repetitive polling when there is nothing else for the issuing process to do.
TOP HOME

Specifications

Hardware
Connector 6-Pin pluggable Terminal block x 8
LED Indicators
Status Communication state (Link, Error)
Internal 3.3 V Power
Termination Resistor Switch Input/output state
Digital Input
Channels 32
Type NPN
Wet Contact, ON Voltage Level +10 ~ 24 VDC
Wet Contact, OFF Voltage Level +3 VDC max.
Isolation 2500 Vrms
Input Impedance 4.7K Ohm
Motionnet
Communication Connectors Mini-clamp Connector x 2
Transfer Speed Selectable 2.5, 5, 10 or 20 Mbps
by DIP Switch.
Cyclic Scan Time 15.1 μs per device (20 Mbps)
Power
Input Range 24 VDC (1000 V isolated)
Consumption 2 W max.
Mechanical
Casing Aluminum
Dimensions (mm) 83 mm x 93 mm x 63 mm
Installation DIN-Rail mounting
Environmental
Operating Temperature 0 ~ +60 °C
Storage Temperature -20~ +80 °C
Humidity 10 ~ 90%; non-condensing
TOP HOME

Odering information

MN-D640-DIN     CR Distributed Motionnet 32-ch Isolated DI Module with Mini-clamp Connector (RoHS)
TOP HOME