Trang chủ » Industrial Communication » Bộ chuyển đổi RS-232/485 sang Wi-Fi(Ethernet) OS MiniOS7 ICP DAS M2M-711D CR

Bộ chuyển đổi RS-232/485 sang Wi-Fi(Ethernet) OS MiniOS7 ICP DAS M2M-711D CR

Remote Maintenance Ethernet Device Terminal Unit with Wi-Fi, RS-232 and RS-485 Ports(Asia Only)

Chia sẻ:
Model: M2M-711D CR
Views: 1369

Bộ chuyển đổi RS-232/485 sang Wi-Fi(Ethernet) OS MiniOS7 ICP DAS M2M-711D CR

The M2M-711D module is specially designed for the remote maintenance and upgrading the serial to network application solution. It is suitable for the harsh industrial field. M2M-711D provides 2 major technologies on networking. 1. VxServer mode: The VxServer is a virtual com middleware software. The VxServer with VxComm Driver can create virtual COM ports in Windows and maps them to the serial ports of the M2M-711D devices through the Ethernet / Wi-Fi network. The user’s RS-232 client programs need only to change to the virtual COM port to access the serial devices connected to the device servers through the network. 2. Pair-connection mode: It provides TCP data tunneling between 2 serial devices. Therefore, by means of TCP/IP server/client infrastructure, M2M-711D can provide the remote serial data transmission by Ethernet or Wi-Fi (IEEE 802.11b/g) between local and remote sides. This solution can transfer the site condition of equipment accurately. The maintenance engineer can directly check and diagnose the device/PLC like on-site. This can reduce the huge maintenance cost to increase the competition of enterprises. Except for the functionality above, M2M-711D can also be support the Pair-Connection of other equipment (M-4131, M2M-720-A, M2M-710D…).

1.Serial application revolution: Upgrade the original serial application to network application.

2.Remote Maintenance: Establish the remote maintenance system of the equipments sold in the world.

  • 3.Virtual Com: Remote maintenance by Virtual Com technology. (It’s not supported in Wi-Fi mode).

CPU Module
CPU 80186, 80 MHz
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
Flash Flash ROM: 512 KB ; Erase unit is one sector (64 KB) ; 100,000 erase/write cycles
SRAM 512 KB
Display
Type 5-Digit 7 Segment LED Display
System LED Indicator
Wi-Fi LED Indicator
RF
Antenna 2.4GHz – 2dBi Omni-Directional antenna
Channels 1~13; AP mode supports auto control channel
RX Sensitivity 87 dBm(IEEE 802.11b) / -72 dBm (IEEE 802.11g)
Transmit Power 12 dBm(IEEE 802.11b) / 14 dBm(IEEE 802.11g)
Transmission Distance (LoS) 100M
COM Ports
Ports 1 x RS-232
1 x RS-485
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Parity None, Even, Odd
Data Bit 7, 8
Stop Bit 2 (data bit must be 7 bit) or 1
Ethernet
Ports 10/100Base-TX Ethernet Controller
RJ-45 with LED indicator
Power
Consumption 3.6 W for M2M-711D
Mechanical
Dimensions (mm) 72 x 123 x 33 (W x L x H)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
M2M-711D     CR  Remote Maintenance Ethernet Device Terminal Unit with Wi-Fi, RS-232 and RS-485 Ports (RoHS)(Asia Only)
TOP HOME