Trang chủ » Remote I/O Module and Unit » RS-485 I/O Modules » I-7000 » Module RS-485 Modbus RTU, DCON 16 kênh đầu ra PWM +8 kênh đầu vào bộ đếm ICP DAS M-7088-16-G CR

Module RS-485 Modbus RTU, DCON 16 kênh đầu ra PWM +8 kênh đầu vào bộ đếm ICP DAS M-7088-16-G CR

16-ch PWM Output and 8-ch High-speed Counter Input Module (5 VDC)

Chia sẻ:
Model: M-7088-16-G CR
Views: 453

Module RS-485 Modbus RTU, DCON 16 kênh đầu ra PWM +8 kênh đầu vào bộ đếm ICP DAS M-7088-16-G CR

The M-7088-16 provides 16-channel PWM (Pulse Width Modulation) Output, and can be used to develop powerful and cost-effective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application. It supports both the Modbus RTU and the DCON protocols, and External PWR allows the load voltage to be increased from +3.5 to +50 V for the 16-channels PWM (Pulse Width Modulation) output.

• Controlling Motor Position/Speed
• Dimming Lamp Brightness
• Controlling Fan Speed

CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)
Isolation
Intra-module Isolation 2500 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
LED Indicators
Status 1 x Power and Communication
Digital Output
Type PWM, TTL
Sink/Source (NPN/PNP) Sink
Load Voltage +5 VDC
Max. Load Current Sink: +5 VDC @ 10 mA/Channel
Source: +5 VDC @ 1 mA/Channel
PWM
Channels 16
Type PWM, TTL
Load Voltage +5 ~ +50 VDC
Frequency 1 Hz ~ 500 KHz
Duty Cycle 0.1 to 99.9%
Mode Burst, Continuous
Burst Count 1 to 65535
Trigger Start Software
COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Protocol Modbus RTU, DCON
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +48 VDC
Consumption 2.9 W
Mechanical
Dimensions (mm) 121 x 76 x 42 (W x L x H)
Installation DIN-Rail
Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
M-7088-16-G     CR 16-ch PWM Output and 8-ch High-speed Counter Input Module (5 VDC) using DCON and Modbus Protocols (Gray Cover) (RoHS)
TOP HOME