Trang chủ » Remote I/O Module and Unit » Module RS-485 DCON & Modbus RTU 16 kênh đầu vào số (DI) ICP DAS M-7053D-G CR

Module RS-485 DCON & Modbus RTU 16 kênh đầu vào số (DI) ICP DAS M-7053D-G CR

16-ch Non-isolated DI (Dry) Module with LED Display

Chia sẻ:
Model: M-7053D-G CR
Views: 332

Module RS-485 DCON & Modbus RTU 8 kênh đầu vào số (DI) ICP DAS M-7053D-G CR

The I-7052 offers 6 fully independent channels and 2 common ground channels for digital input. The diffential inputs feature channel-to-isolation. In addition, you can choose either sink- or source-type input via wire connections. All channels are able to be used as 16-bit has 8 LED indicators for DI channel status monitoring. 4 kV ESD protection and 5000 Vrms intra-module isolation are standard. The M-7052 has the same hardware specifications as the I-7052, but provides additional support for the Modbus RTU protocol as well as the DCON protocol. The I-7053-FG features a long effective distance measurement for dry contact digital input of up to 500 meters. The I-7053-FG supports source-type input. All 16 channels are also able to be used as 16-bit counters, each of which are non-isolated. The I-7053D-FG has 16 LED indicators for channel status monitoring. The M-7053 has the same hardware specifications as the I-7053-FG, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Models I-7052 M-7052 I-7053_FG M-7053
I-7052D M-7052D I-7053D_FG M-7053D
Digital Input/Counter
Channels 8 16
Type Dry Contact Source
Wet Contact Sink/Source
Wet Contact On Voltage Level +4 ~ 30 VDC
Off Voltage Level +1 VDC Max.
Dry Contact On Voltage Level Open
Off Voltage Level Close to GND
Effective Distance
for Dry Contact
500 m Max.
Counters Max. Count 65535 (16-bit)
Max. Input Frequency 100 Hz
Min. Pulse Width 5 ms
Input Impedance 3 KΩ
Channel-to-Channel Isolation Yes, ±2 kV for differential only.
Overvoltage Protection ±35 VDC
Models I-7052 M-7052 I-7053_FG M-7053
I-7052D M-7052D I-7053D_FG M-7053D
Communication
Interface RS-485
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol DCON Modbus RTU, DCON DCON Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator
Yes, 8 LEDs as Digital Input Indicators Yes, 16 LEDs as Digital Input Indicators
7-Segment LED Display
Isolation
Intra-Module Isolation, Field-to-Logic 5000 Vrms
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each Terminal
8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5)
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 0.2 W 0.2 W 0.7 W 0.7 W
0.6 W 0.6 W 0.9 W 0.9 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
M-7053D-G     CR 16-ch Non-isolated DI (Dry) Module with LED Display using DCON and Modbus Protocols (Gray Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs
TOP HOME