Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module RS-485 Modbus RTU 7 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS M-7050D-G CR

Module RS-485 Modbus RTU 7 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS M-7050D-G CR

7-ch Non-isolated DI (Dry) and 8-ch Non-isolated DO (Sink, NPN) Module with LED Display
Chia sẻ:
Model: M-7050D-G CR
Views: 347

Module RS-485 Modbus RTU 7 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS M-7050D-G CR

The I-7050 series of modules offers channels for digital input and 8 channels for digital output, each of which are non-isolated. The I-7050 supports sink-type output using an NPN open collector, and source-type input. All input channels are able to be used as 16-bit counters. There are also options to enable both power-on and safe values. The I-7050D has 15 LED indicators that can be used to monitor channel status. The M-7050 has the same hardware specifications as the I-7050, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)
Display
Type I/O LED Indicator
LED Indicators
Status 1 x Power and Communication
7 x Digital Input
8 x Digital Output
Digital Input/Counter
Channels 7
Type Dry Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level Open
OFF Voltage Level Close to GND
Max. Counts 65535 (16-bit)
Frequency 100 Hz
Min. Pulse Width 5 ms
Effective Distance 500 m Max.
Input Impedance 100 KΩ
Digital Output
Channels 8
Type Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +3.5 ~ 30 VDC
Load Current 30 mA/Channel
Power on Value Yes
Safe Value Yes
COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Protocol Modbus RTU, DCON
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.1 W
Mechanical
Dimensions (mm) 123 x 72 x 35 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
M-7050D-G     CR 7-ch Non-isolated DI (Dry) and 8-ch Non-isolated DO (Sink, NPN) Module with LED Display using DCON and Modbus Protocols (Gray Cover) (RoHS)
TOP HOME