Trang chủ » Remote I/O Module and Unit » RS-485 I/O Modules » I-7000 » Module RS-485 DCON & Modbus RTU 7 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS M-7050-G CR

Module RS-485 DCON & Modbus RTU 7 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS M-7050-G CR

7-ch Non-isolated DI (Dry) and 8-ch Non-isolated DO (Sink, NPN) Module
Chia sẻ:
Model: M-7050-G CR
Views: 356

Module RS-485 DCON & Modbus RTU 7 kênh đầu vào số (DI) + 8 kênh đầu ra số (DO) ICP DAS M-7050-G CR

The I-7050 series of modules offers channels for digital input and 8 channels for digital output, each of which are non-isolated. The I-7050 supports sink-type output using an NPN open collector, and source-type input. All input channels are able to be used as 16-bit counters. There are also options to enable both power-on and safe values. The I-7050D has 15 LED indicators that can be used to monitor channel status. The M-7050 has the same hardware specifications as the I-7050, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Model I-7050 I-7050D I-7050A I-7050AD
M-7050 M-7050D
Digital Input/Counter
Channels 7
Type Dry Contact Sink
Wet Contact Source Sink
Wet Contact On Voltage Level +4 ~ 30 VDC
Off Voltage Level +1 VDC Max.
Dry Contact On Voltage Level Open
Off Voltage Level Close to GND
Effective Distance
for Dry Contact
500 m Max.
Counters Max. Count 65535 (16-bit)
Max. Input
Frequency
100 Hz
Min. Pulse Width 5 ms
Input Impedance 100 KΩ
Channel-to-Channel Isolation
Overvoltage Protection
Digital Output
Channels 8
Type Open Collector
Sink/Source (NPN/PNP) Sink Source
Overvoltage Protection +3.5 ~ 30 VDC
Max. Load Current 30 mA/Channel 50 mA/Channel
Overvoltage Protection
Overload Protection
Power-on Value Yes
Safe Value Yes
Model I-7050 I-7050D I-7050A I-7050AD
M-7050 M-7050D
Communication
Interface RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol DCON (For I-7050 series)
Modbus RTU, DCON (For M-7050 series)
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicators Yes, 7 LEDs as Digital Input
& 8 LED as Digital Output Indicators
Yes, 7 LEDs as Digital Input
& 8 LED as Digital Output Indicators
7-Segment LED Display
Isolation
Intra-Module Isolation, Field-to-Logic
EMS Protection
ESD (IEC 61000-4-2)
EFT (IEC 61000-4-4)
Surge (IEC 61000-4-5)
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 0.4 W 1.1 W 0.5 W 1.2 W
0.4 W 1.1 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
M-7050-G     CR 7-ch Non-isolated DI (Dry) and 8-ch Non-isolated DO (Sink, NPN) Module using DCON and Modbus Protocols (Gray Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs
TOP HOME