Trang chủ » Remote I/O Module and Unit » Module RS-485 DCON & Modbus RTU 16 kênh đầu ra số (DO) ICP DAS M-7043D-G CR

Module RS-485 DCON & Modbus RTU 16 kênh đầu ra số (DO) ICP DAS M-7043D-G CR

16-ch Non-isolated DO (Sink, NPN, 10~30 VDC) Module with LED Display

Chia sẻ:
Model: M-7043D-G CR
Views: 409

Module RS-485 DCON & Modbus RTU 16 kênh đầu ra số (DO) ICP DAS M-7043D-G CR

The I-7042 offers 13 channels digital output channels, each of which features Photocouple isolation and supports sink-type output using an open collector. There are also options to enable both power-on and safe values. The I-7042D has 13 LED indicators that can be used to monitor the status of DO channels. 3750 Vrms intra-module isolation is standard. The I-7043 offers 16 digital output channels, each of which are non-isolated and support sink-type output using an open collector. There are also options to enable both power-on and safe values. The I-7043D has 16 LED indicators that can be used to monitor the status of DO channels. The hardware specifications for the M-7043 are the same as the I-7043, and both support the Modbus RTU and DCON protocols, which can be configured via software.
  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Models I-7042 I-7043 M-7043
I-7042D I-7043D M-7043D
Digital Output
Channels 13 16
Type Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +3.5 ~ 30 VDC +10 ~ 30 VDC
Max. Load Current 100 mA/Channel
Overvoltage Protection
Overload Protection
Power-on Value Yes
Safe Value Yes
Models I-7042 I-7043 M-7043
I-7042D I-7043D M-7043D
Communication
Interface RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 to 115200 bps
Protocol DCON Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator
Yes, 13 LEDs as Digital Output Indicators Yes, 16 LEDs as Digital Output Indicators Yes, 16 LED as Digital Output Indicator
7-Segment LED Display
Isolation
Intra-Module Isolation, Field-to-Logic 3750 Vrms
EMS Protection
ESD (IEC 61000-4-2) ±2 kV Contact for each Terminal
±4 kV Air for Random Point
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5)
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1.0 W 0.4 W 0.4 W
1.7 W 1.1 W 1.1 W
Mechanical
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing
M-7043D-G     CR 16-ch Non-isolated DO (Sink, NPN, 10~30 VDC) Module with LED Display using DCON and Modbus Protocols (Gray Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs
TOP HOME