Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module RS-485 Modbus RTU 14 kênh đầu vào số (DI) ICP DAS M-7041P-G CR

Module RS-485 Modbus RTU 14 kênh đầu vào số (DI) ICP DAS M-7041P-G CR

14-ch Isolated DI (Wet, 4~30 VDC) Module with LED Display

Tính năng

Module RS-485 Modbus RTU 14 kênh đầu vào số (DI) ICP DAS M-7041P-G CR

• Sink- or Source-type Digital Input
• Photocouple Isolation
• All Channels can be used as 16-bit Counters
• ±4 kV ESD Protection
• 3750 VDC Isolation Voltage
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C

Chia sẻ:
Model: M-7041P-G CR
Views: 1150

Module RS-485 Modbus RTU 14 kênh đầu vào số (DI) ICP DAS M-7041P-G CR

The I-7041 and I-7041P provide 14 channels for digital input, each of which features photocouple isolation. In addition, either sink- or source-type digital input can be selected via wire connections, and all channels are able to be used as 16-bit counters. The I-7041D and I-7041PD include 14 LED indicators that can be used for DI channel status monitoring. 4 kV ESD protection and 3750 VDC intra-module isolation are standard. The hardware specifications for the M-7041 and M-7041P are the same as for the I-7041 and I-7041P, and support both the Modbus RTU and DCON protocols, which can be configured via software. ICPDAS recommends selecting the “P” version of the digital input module for industrial use.

  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)
Display
Type I/O LED Indicator
Isolation
Intra-module Isolation 3750 VDC
EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point
LED Indicators
Status 1 x Power and Communication
Digital Input/Counter
Channels 14
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +19 ~ +30 VDC
OFF Voltage Level +1 VDC Max.
Max. Counts 65535 (16-bit)
Frequency 100 Hz
Min. Pulse Width 5 ms
Input Impedance 3 KΩ
Overvoltage Protection ±35 VDC
COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format N, 8, 1
Protocol Modbus RTU, DCON
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 0.2 W
Mechanical
Dimensions (mm) 123 x 72 x 35 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
M-7041D-G     CR 14-ch Isolated DI (Wet, 4~30 VDC) Module with LED Display using DCON and Modbus Protocols (Gray Cover) (RoHS)
Datasheet Documents
TOP HOME