Trang chủ » Module vào/ra tương tự/số kết nối RS-485/Ethernet » Module RS-485 DCON & Modbus 14 kênh đầu vào số (DI) ICP DAS M-7041D-A5 CR

Module RS-485 DCON & Modbus 14 kênh đầu vào số (DI) ICP DAS M-7041D-A5 CR

14-ch High Voltage Isolated DI (Wet, 68~150 VDC) Module with LED Display

Tính năng

Module RS-485 DCON & Modbus 14 kênh đầu vào số (DI) ICP DAS M-7041D-A5 CR

• 150V High Voltage Digital Inputs
• Sink- or Source-type Digital Inputs
• Photocouple Isolation
• All Channels Can Be Used As 16-bit Counters
• 4 kV ESD Protection
• 3750 VDC Isolation Voltage
• Built-in Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C

Chia sẻ:
Model: M-7041D-A5 CR
Views: 290

Module RS-485 DCON & Modbus 14 kênh đầu vào số (DI) ICP DAS M-7041D-A5 CR

The M-7041(D)-A5 provides 14 channels for high voltage digital input, each of which features photocouple isolation. The input voltage level could be as high as 150V. In addition, either sink- or source-type digital input can be selected via wire connections, and all channels are able to be used as 16- bit counters. The M-7041D-A5 has 14 LED indicators for DI channel status monitoring. 4 kV ESD protection and 3750 VDC intra-module isolation are standard. The M-7041(D)-A5 support both the Modbus RTU and DCON protocols, which can be configured via software.

  • Tự động hóa tòa nhà
  • Tự động hóa nhà máy
  • Máy tự động
  • Bảo trì từ xa
  • Chẩn đoán từ xa
  • Kiểm tra trang thiết bị
Models M-7041-A5 M-7041D-A5
Digital Input/Counter
Channels 14
Contact Wet
Sink/Source (NPN/PNP) Sink/Source
Wet Contact On Voltage Level +68 ~ +150 VDC
Off Voltage Level +48 VDC Max.
Dry Contact On Voltage Level –
Off Voltage Level –
Counters Max. Count 65535 (16-bit)
Max. Input
Frequency		 100 Hz
Min. Pulse Width 5 ms
Input Impedance 50 KΩ
Models M-7041-A5 M-7041D-A5
Communication
Interface RS-485
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator – Yes
Isolation
Intra-Module Isolation, Field-to-Logic 3750 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for Each Terminal
8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV, ±2 kV for the RS-485 Port
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 0.2 W 1.0 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing
M-7041D-A5-G     CR 14-ch High Voltage Isolated DI (Wet, 68~150 VDC) Module with LED Display using DCON and Modbus Protocols (Gray Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs
Data Sheet icon_manual icon_address-3
TOP HOME